| auszookers.com https://auszookers.com/forum/ |
|
| Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114.3m) https://auszookers.com/forum/viewtopic.php?f=5&t=24609 |
Page 1 of 1 |
| Author: | squibby [ Sun Aug 07, 2011 9:28 am ] |
| Post subject: | Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114.3m) |
Anyone know where I can get a winch with those specs? Can't find many suppliers. Want a rating of about 6000lbs, but I'll happily by a 4000lbs perhaps if I can find one. |
|
| Author: | zooky08 [ Sun Aug 07, 2011 10:38 am ] |
| Post subject: | Re: Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114.3m) |
i thought neally all winches over 6000lbs suits that spacing go for the tigerz11 winches, verygood prices |
|
| Author: | Red89 [ Sun Aug 07, 2011 11:01 am ] |
| Post subject: | Re: Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114 |
Most are around 10' x 4.5' |
|
| Author: | zooky08 [ Sun Aug 07, 2011 11:14 am ] |
| Post subject: | Re: Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114.3m) |
just looked it up, your right most winches come in the 154mmx114.3 spacing |
|
| Author: | TryHard [ Sun Aug 07, 2011 12:34 pm ] |
| Post subject: | Re: Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114 |
http://www.kpd4x4.com/ had good price on tigers winches |
|
| Author: | squibby [ Mon Aug 08, 2011 8:29 am ] |
| Post subject: | Re: Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114.3m) |
Thanks, ordered a tigerz winch. Its the wrong spacing, but I'll make it fit. |
|
| Author: | TryHard [ Mon Aug 08, 2011 8:40 am ] |
| Post subject: | Re: Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114.3m) |
squibby wrote: Thanks, ordered a tigerz winch. Its the wrong spacing, but I'll make it fit.
nothing cant be made to fit haha |
|
| Author: | squibby [ Mon Aug 08, 2011 10:01 pm ] |
| Post subject: | Re: Winch, Mounting plate pattern 6 x 4.5 inch(152.4mm x 114.3m) |
TryHard wrote: squibby wrote: Thanks, ordered a tigerz winch. Its the wrong spacing, but I'll make it fit. nothing cant be made to fit haha You said it! I'll buy a winch plate to strengthen it all up a bit if I think it looks a bit weak after I drill the new mounting holes. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|