Hey Guys
Got an issue with my 92 sierra.
Front left wheel has positive camber
, Checked it with a plumbob and with the string resting against the sidewall of the tyre at the top there is almost 10mm of clearance between the sidewall at the bottom and the string.
Have checked the wheel bearings and the king pins and all seem pretty good, I would say they were checked and re greased not long before i got it because the grease looked fresh.
If it was negative camber i would say bent housing from jumping.
Any idea's on what else i could look at?????????
This has got me stumped, I do have another housing but need to replace the spring perches before I swap it over and hope its not the same.