| Author |
Message |
cbzook

az supporter
Joined: Sat Sep 13, 2008 11:30 pm Posts: 272 Location: Port Macquarie
Vehicle: 6.5s, gti, 31 extremes
|
 Posted: Sun Aug 07, 2011 2:20 pm |
|
|
Hey guys
Getting my car ready for rego on Tuesday n my brake lights have stopped working, they were working last week before I went wheeling n now they r dead, ive checked the fuses all ok, check to make sure the switch on pedal still was connected n it's all ok, I m really unsure wat to check next any ideas on what to try next or look for (Royce please help)
Thanks
Nic
_________________ Twincam coiler, rocktoy, 6.5s, lift, 31 extremes
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Sun Aug 07, 2011 5:39 pm |
|
cbzook wrote: Hey guys
Getting my car ready for rego on Tuesday n my brake lights have stopped working, they were working last week before I went wheeling n now they r dead, ive checked the fuses all ok, check to make sure the switch on pedal still was connected n it's all ok, I m really unsure wat to check next any ideas on what to try next or look for (Royce please help)
Thanks Nic
Might be a stupid question, but have you checked your globes... the next thing to do, would be to check if you are getting 12volts at the brake lights, if not, you have a broken wire, if yes, then earth/negative wire has come off somewhere... 
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Aug 07, 2011 9:22 pm |
|
|
check the fuse with a test light?
its pretty easy, check you have power (with a test light) on one side of the brake light switch and then on the other when you press the brake
if you do move to the rear and see if you have power (and earth) in the socket
|
|
|
|
 |
jonno_racing

az supporter
Joined: Wed Apr 15, 2009 11:30 pm Posts: 8164 Location: Tassie
Vehicle: suzuki
|
 Posted: Sun Aug 07, 2011 10:18 pm |
|
|
that's today's job royce. i swear i spend more time working on other peoples zooks than my own now i have moved!
_________________ Do cool stuff, Put it on the internet Sierra build, Jimny build https://www.youtube.com/user/redzook1
|
|
|
|
 |
jonno_racing

az supporter
Joined: Wed Apr 15, 2009 11:30 pm Posts: 8164 Location: Tassie
Vehicle: suzuki
|
 Posted: Sun Aug 07, 2011 10:19 pm |
|
|
|
 |
jonno_racing

az supporter
Joined: Wed Apr 15, 2009 11:30 pm Posts: 8164 Location: Tassie
Vehicle: suzuki
|
 Posted: Mon Aug 08, 2011 12:50 am |
|
|
fuse is fine. switch under dash works and has power. but no power at lights. earth is fine and parks work!
_________________ Do cool stuff, Put it on the internet Sierra build, Jimny build https://www.youtube.com/user/redzook1
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Mon Aug 08, 2011 1:07 am |
|
|
is there power coming out of the switch when you press the pedal?
|
|
|
|
 |
cbzook

az supporter
Joined: Sat Sep 13, 2008 11:30 pm Posts: 272 Location: Port Macquarie
Vehicle: 6.5s, gti, 31 extremes
|
 Posted: Mon Aug 08, 2011 1:14 am |
|
|
I bridged the terminals on the wire side of plug( to lights ) n no luck any ideas
_________________ Twincam coiler, rocktoy, 6.5s, lift, 31 extremes
|
|
|
|
 |
mongrelzook
Joined: Mon Jun 27, 2011 11:55 am Posts: 144 Location: brisbane
Vehicle: 96 sj70+80 tintop sierra
|
 Posted: Mon Aug 08, 2011 1:42 am |
|
|
Where do ur wires go near tail lights? Check connectors might be wet, muddy
|
|
|
|
 |
jonno_racing

az supporter
Joined: Wed Apr 15, 2009 11:30 pm Posts: 8164 Location: Tassie
Vehicle: suzuki
|
 Posted: Mon Aug 08, 2011 7:18 am |
|
|
turned out to be a dicky power suply to the switch. due to it being due for rego tomrow i ran a new one for the aux fuse box. i will fix the old one when we get time!
_________________ Do cool stuff, Put it on the internet Sierra build, Jimny build https://www.youtube.com/user/redzook1
|
|
|
|
 |
|