| auszookers.com https://auszookers.com/forum/ |
|
| My new spring set up https://auszookers.com/forum/viewtopic.php?f=5&t=2470 |
Page 1 of 1 |
| Author: | Mike [ Fri Jul 11, 2008 11:59 pm ] |
| Post subject: | My new spring set up |
i finally decided what springs to get i got some EFS rears and new i've got a couple questions before i stuff everything up i got some gabriel shocks off a liteace and they are about 3 inches longer than what i've got at them moment is that gonna be long enough for 65mm lifted springs
my next question is what leaf should i take out because they are fairly stiff?
my last question is when i put the rears up front do i need to do anything to the springs eg. take out leaves or put some of the front leaves in the rear pack? cheers |
|
| Author: | steve [ Sat Jul 12, 2008 12:03 am ] |
| Post subject: | Re: My new spring set up |
in the pic, i'd take out the leaf above the load leaf, (load leaf being the bottom straight one. |
|
| Author: | royce [ Sat Jul 12, 2008 12:07 am ] |
| Post subject: | Re: My new spring set up |
if you are using standard mounts extended length means nothing, you want to make sure the diff will hit the bumpstops before the shock bottoms out, IE the COMPRESSED length is not longer than the distance between shock mounts fully compressed, though in this case it will be fine I think I would pull the short curved leaf out and put it in your standard rear to go in the front, I think stock rears arent stiff enough for fronts and collapse pretty easy (my best was 24 hours) |
|
| Author: | Mike [ Sat Jul 12, 2008 12:07 am ] |
| Post subject: | Re: My new spring set up |
should i take the spring clamps off and do you think those shocks will be enough? |
|
| Author: | royce [ Sat Jul 12, 2008 12:10 am ] |
| Post subject: | Re: My new spring set up |
dont take the clamps off, see what they do at full flex first the key to good suspension is one small mod at a time, get to know how it works in all situations then make a change so you know how it changes things I went all out massive soft springs, massive shocks and it all flexed awsome and looked cool, but try and climb a rutted hill and it was all over the place and shit, its all about balance |
|
| Author: | Mike [ Sat Jul 12, 2008 12:13 am ] |
| Post subject: | Re: My new spring set up |
do i leave the load leaf off the rears when i put it in the front? which way should that bracket thing on the spring face? |
|
| Author: | royce [ Sat Jul 12, 2008 12:18 am ] |
| Post subject: | Re: My new spring set up |
yes take the load leaf off spring will only go in 1 way |
|
| Author: | Mike [ Sat Jul 12, 2008 12:22 am ] |
| Post subject: | Re: My new spring set up |
i just remember that so take the leaf about the load leaf out of the new rears then put that leaf in the old rears and take off the load leaf? does that make sense? |
|
| Author: | royce [ Sat Jul 12, 2008 12:23 am ] |
| Post subject: | Re: My new spring set up |
makes sense to a sierra owner, I wouldnt be inclined to ask people in the street though |
|
| Author: | Mike [ Sat Jul 12, 2008 12:26 am ] |
| Post subject: | Re: My new spring set up |
its fun asking susupention places for commodore shocks to fit a sierra |
|
| Author: | Mike [ Sat Jul 12, 2008 1:27 am ] |
| Post subject: | Re: My new spring set up |
do i take the short leaf off the old rears or do i just put the short leaf from the new springs under it, should i have 4 or 5 leaves in the front? |
|
| Author: | royce [ Sat Jul 12, 2008 1:35 am ] |
| Post subject: | Re: My new spring set up |
just add it on nothing will be final cause you will have to tinker with adding and removing springs to get it just right |
|
| Author: | Mike [ Sat Jul 12, 2008 1:43 am ] |
| Post subject: | Re: My new spring set up |
i'm hoping i won't have to do to much with them anything will be better than the set up i've got at the moment am i gonna need longer brake lines? |
|
| Author: | steve [ Sat Jul 12, 2008 1:45 am ] |
| Post subject: | Re: My new spring set up |
yer the front usually needs longer lines once you more than the usual 2inch lift. |
|
| Author: | Mike [ Sat Jul 12, 2008 1:47 am ] |
| Post subject: | Re: My new spring set up |
i thought so will the i need a rear one too? |
|
| Author: | steve [ Sat Jul 12, 2008 1:57 am ] |
| Post subject: | Re: My new spring set up |
i don't think the rear one is that bad, flex it up and have a look. I think you can get away without extending the rear one, but you could do it anyway just for bling factor. |
|
| Author: | Mike [ Sat Jul 12, 2008 2:01 am ] |
| Post subject: | Re: My new spring set up |
steve wrote: but you could do it anyway just for bling factor.
do they make red brake lines |
|
| Author: | Brett [ Sat Jul 12, 2008 3:32 am ] |
| Post subject: | Re: My new spring set up |
you will need to drill you rear spring mout about 20 mm back aswell so your steering links don't get cought up when flexing. i think the aim is to have you diff about 1 " to 1.5" forward from stock and every thing sholud be fine |
|
| Author: | Mike [ Sat Jul 12, 2008 3:35 am ] |
| Post subject: | Re: My new spring set up |
my steering links are all bent i didn't realise i had to do that, i'd like to try it without drilling the holes first because i'd more than likely stuff that up |
|
| Author: | Brett [ Sat Jul 12, 2008 3:39 am ] |
| Post subject: | Re: My new spring set up |
it will move you diif forwad a bit, you'll have to redrill the spring pad forward of the axle to move the diff back a bit but will make the car very stable if you steering works |
|
| Author: | Mike [ Sat Jul 12, 2008 3:44 am ] |
| Post subject: | Re: My new spring set up |
wow i didn't realise i had so much work ahead of me, looks like i won't have it back together for a while at least i won't have to worry about the front tyres scrubbing anymore |
|
| Author: | Brett [ Sat Jul 12, 2008 3:46 am ] |
| Post subject: | Re: My new spring set up |
not much more work, just to more holes drilled. you'll have it apart any way. just run a tape over every thing twice before you drill. |
|
| Author: | Mike [ Sat Jul 12, 2008 3:50 am ] |
| Post subject: | Re: My new spring set up |
how far which way do i have to drill the spring perches? |
|
| Author: | Brett [ Sat Jul 12, 2008 3:58 am ] |
| Post subject: | Re: My new spring set up |
can't remember off the top of my head ,think about 20 mm forward of the axle to move the diff back 20 mm |
|
| Author: | Mike [ Sat Jul 12, 2008 4:04 am ] |
| Post subject: | Re: My new spring set up |
so i want to move the diff back around an inch? |
|
| Author: | Brett [ Sat Jul 12, 2008 4:06 am ] |
| Post subject: | Re: My new spring set up |
yes because the spring will move it forward about 2 or 3 and then the steering gets stuffed up. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|