| auszookers.com https://auszookers.com/forum/ |
|
| springs with spoa https://auszookers.com/forum/viewtopic.php?f=5&t=2485 |
Page 1 of 1 |
| Author: | zookkid [ Sun Jul 13, 2008 5:41 am ] |
| Post subject: | springs with spoa |
i have 2'' lifted springs and was wondering would i be able to use them in a spoa conversion-but i dont want extreme height. so i was thinking would it work if i just took some leaves out? if so how many?? |
|
| Author: | Mike [ Sun Jul 13, 2008 5:46 am ] |
| Post subject: | Re: springs with spoa |
i'm by no means an expert but you should be able to use the springs are they heavier duty than standards? or are they just higher? |
|
| Author: | zookkid [ Sun Jul 13, 2008 6:24 am ] |
| Post subject: | Re: springs with spoa |
im not sure if the're heavier duty but there's 5 leaves in 1 pack,the standard 1's only had 3 a pack. they are 2'' taller. |
|
| Author: | Mike [ Sun Jul 13, 2008 6:30 am ] |
| Post subject: | Re: springs with spoa |
standard springs have 4 leaves and and over load leaf this is a reset standard compared to a 65mm lifted spring 
if you want to lower the springs you got take out the second leaf, the one above the load leaf but this will also make the spring softer |
|
| Author: | zookkid [ Sun Jul 13, 2008 7:53 am ] |
| Post subject: | Re: springs with spoa |
 mm ok cool cheers good to know
|
|
| Author: | basketcase [ Sun Jul 13, 2008 1:54 pm ] |
| Post subject: | Re: springs with spoa |
A spring over would get you a fair bit of lift, maybe 5"?? Should be going for standard flat springs, no lift at all. What size tyre do you plan on running? I see you also want a body lift in another thread. SPOA plus a body lift is huge on such a short wheel base. Think about virtual lifts and moving your diffs before going so high if you want to fit bigger tyres. |
|
| Author: | zookkid [ Sun Jul 13, 2008 2:13 pm ] |
| Post subject: | Re: springs with spoa |
nah ill think ill just stay spua for the moment.i only want to run 31's anyway and seeing blusuzy flex up looks awsum. but thanx for the comment |
|
| Author: | Brett [ Sun Jul 13, 2008 5:00 pm ] |
| Post subject: | Re: springs with spoa |
if you only want to runn 31's stay spua and put a 2 inch body lift in with spoa you'll fit 33" wheels no problems with no body lift but move your front diff forward a inch. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|