I try'd serching and never did any good till i read this http://www.auszookers.com/index.php?nam ... ic&t=11896
ever since, no drama's
| auszookers.com https://auszookers.com/forum/ |
|
| serria 1.3l more power https://auszookers.com/forum/viewtopic.php?f=5&t=24864 |
Page 1 of 2 |
| Author: | deegs88 [ Tue Aug 16, 2011 8:20 am ] |
| Post subject: | serria 1.3l more power |
I want more power out of my 1.3l engine.What kind of things can i do. |
|
| Author: | ellis [ Tue Aug 16, 2011 8:22 am ] |
| Post subject: | Re: serria 1.3l more power |
try searching this has been covered heaps of times |
|
| Author: | SierraDan [ Tue Aug 16, 2011 8:24 am ] |
| Post subject: | Re: serria 1.3l more power |
Fully rebuilt motor with an aftermarket performance cam and High comp pistons. Rejetted carb or weber carb. Extractors and larger exhaust. Or a G16B.. |
|
| Author: | joel [ Tue Aug 16, 2011 8:25 am ] |
| Post subject: | Re: serria 1.3l more power |
bigger cam better carby its a 1.3 it will never be a power house. better off drpping in a 1.6 big block |
|
| Author: | joel [ Tue Aug 16, 2011 8:27 am ] |
| Post subject: | Re: serria 1.3l more power |
ellis wrote: try searching this has been covered heaps of times
if your not going to help, by giving info or a link, than advising the user to use the search function first next time... fuck off you big noting cunt. im sick of know all big noters. if you have seen it all before, post nothing and leave it to those members on the forum willing to share some info or direct them to a thread and search function cheers joel |
|
| Author: | zooktastic [ Tue Aug 16, 2011 8:29 am ] |
| Post subject: | Re: serria 1.3l more power |
best off removing the 1.3 and do 1.6 swap, definately worth doing, once i did mine i never looked back |
|
| Author: | deegs88 [ Tue Aug 16, 2011 8:31 am ] |
| Post subject: | Re: serria 1.3l more power |
i thought of taking it to a performance place and getting it tuned. |
|
| Author: | SierraDan [ Tue Aug 16, 2011 8:35 am ] |
| Post subject: | Re: serria 1.3l more power |
That would just make it run well. Its not a detuned LS3 that will let out what it can really do after a tune. If you want more noticeable useable power. Do proper mods and have it tuned to those mods. But your best bet is a G16B with extractors and decent exhaust. |
|
| Author: | deegs88 [ Tue Aug 16, 2011 8:39 am ] |
| Post subject: | Re: serria 1.3l more power |
No worries thanks for all your input guys. |
|
| Author: | joel [ Tue Aug 16, 2011 8:39 am ] |
| Post subject: | Re: serria 1.3l more power |
deegs88 wrote: i thought of taking it to a performance place and getting it tuned.
unless it buggered mate, i wouldnt bother,there is only so much you can do with a naturally aspirated carby engine. if the engine is running fine, just leave it and enjoy it. if you really need more power, you will be better off and cheaper to put a vitara efi engine in it. as far as a tune, adjust idle screw and do the distributor timing, thats it, any home mechanic can do it, or if you cant the most basic of mechanic shop can, you wont have to go to a performance shop and have your pants pulled down. |
|
| Author: | ellis [ Tue Aug 16, 2011 8:44 am ] |
| Post subject: | Re: serria 1.3l more power |
how is that not helping if u search it all the info is right there |
|
| Author: | MrRocky [ Tue Aug 16, 2011 8:45 am ] |
| Post subject: | Re: serria 1.3l more power |
skim head to raise compression 3/4 of a point - $50 2" exhaust system - $180 these will be the biggest power gains you will get provided your donk hasnt done a heap of kms, keep in mind we arnt talking 20-30hp here more like 5-10hp max |
|
| Author: | ellis [ Tue Aug 16, 2011 8:45 am ] |
| Post subject: | Re: serria 1.3l more power |
correct? |
|
| Author: | joel [ Tue Aug 16, 2011 8:49 am ] |
| Post subject: | Re: serria 1.3l more power |
ellis wrote: how is that not helping if u search it all the info is right there
the bloke is a pretty new member, is asking a basic question needs some basic answers. it would have taken you more time to be a pretetious prick han give him his answers, a link and a heads up to look threw the search function in the future as there is all the info on most common problems. but you took the know all shithead path. |
|
| Author: | ellis [ Tue Aug 16, 2011 8:51 am ] |
| Post subject: | Re: serria 1.3l more power |
how all i said is try searching its been covered b4 |
|
| Author: | joel [ Tue Aug 16, 2011 8:57 am ] |
| Post subject: | Re: serria 1.3l more power |
ellis wrote: how all i said is try searching its been covered b4
chuck a link up of the thread, its a public forum, of course the question has been asked before. i bet "what 2'' suspension'' thread will be up before the end of the month. advise them of the search function, throw a link to a similar thread with the answers. making someone feel like a dick because they are asking for info helps no-one. maybe you said it with no malice intent, but its something that really annys me. |
|
| Author: | SierraDan [ Tue Aug 16, 2011 8:58 am ] |
| Post subject: | Re: serria 1.3l more power |
The weather is nice today. |
|
| Author: | joe5701 [ Tue Aug 16, 2011 9:16 am ] |
| Post subject: | Re: serria 1.3l more power |
|
I try'd serching and never did any good till i read this http://www.auszookers.com/index.php?nam ... ic&t=11896 ever since, no drama's |
|
| Author: | bohuler [ Tue Aug 16, 2011 9:32 am ] |
| Post subject: | Re: serria 1.3l more power |
MrRocky wrote: skim head to raise compression 3/4 of a point - $50
2" exhaust system - $180 these will be the biggest power gains you will get provided your donk hasnt done a heap of kms, keep in mind we arnt talking 20-30hp here more like 5-10hp max I agree with the extractors. I put them on with an 1 3/4 straight thru system and now I can top out at 140 instead of choking the motor trying to get over 100, and got a noticable improvement in fuel economy too. It would be the first thing to improve performance 
I like the idea about skimming the head, i will have to remember that one! Dave |
|
| Author: | joel [ Tue Aug 16, 2011 9:44 am ] |
| Post subject: | Re: serria 1.3l more power |
^^^^^ 
|
|
| Author: | stocker [ Tue Aug 16, 2011 9:47 am ] |
| Post subject: | Re: serria 1.3l more power |
deegs88 wrote: I want more power out of my 1.3l engine.What kind of things can i do.
Chuck it in the Bin, and Whack a Fuel injected G16B In it 
or you could listen to the voices in your head saying do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it |
|
| Author: | MrRocky [ Tue Aug 16, 2011 9:48 am ] |
| Post subject: | Re: serria 1.3l more power |
extractors help it rev a bit more freely but i dont actually think the styles avaialable in aus make any noticable power gain over the standard manifold they dont crack tho. The major difference is the full 2" system I should also add that u need to run on 98 octane or better when u skim the head that much, that is the absolute max u can skim before u run into mechanical clearance issues |
|
| Author: | SuziBlu [ Tue Aug 16, 2011 9:53 am ] |
| Post subject: | Re: serria 1.3l more power |
joel wrote: ellis wrote: try searching this has been covered heaps of times if your not going to help, by giving info or a link, than advising the user to use the search function first next time... fuck off you big noting cunt. im sick of know all big noters. if you have seen it all before, post nothing and leave it to those members on the forum willing to share some info or direct them to a thread and search function cheers joel Well said. Why waste anyones time writing shit that means nothing. |
|
| Author: | JrZook [ Tue Aug 16, 2011 9:58 am ] |
| Post subject: | Re: serria 1.3l more power |
stocker wrote: deegs88 wrote: I want more power out of my 1.3l engine.What kind of things can i do. Chuck it in the Bin, and Whack a Fuel injected G16B In it or you could listen to the voices in your head saying do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it Pift what is with this junk info? What is actually wrong with the G13? I reckon they are a bloody awesome engine! Yes the G16 EFI has more power etc but a descent condition g13 set up with a good exhaust and carb offers a very nice increase in torque and is very nice to drive. The G16 is a nice solution but is not the ONLY solution |
|
| Author: | joel [ Tue Aug 16, 2011 10:04 am ] |
| Post subject: | Re: serria 1.3l more power |
JrZook wrote: stocker wrote: deegs88 wrote: I want more power out of my 1.3l engine.What kind of things can i do. Chuck it in the Bin, and Whack a Fuel injected G16B In it or you could listen to the voices in your head saying do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it Pift what is with this junk info? What is actually wrong with the G13? I reckon they are a bloody awesome engine! Yes the G16 EFI has more power etc but a descent condition g13 set up with a good exhaust and carb offers a very nice increase in torque and is very nice to drive. The G16 is a nice solution but is not the ONLY solution the original post he wanted more power, we assume he wants noticeable power increase. the g13b is a good performer as a solid reliable little sweat heart engine, but for a power increase that he will notice... put the 1.6 efi big block in. |
|
| Author: | sogone [ Tue Aug 16, 2011 10:07 am ] |
| Post subject: | Re: serria 1.3l more power |
I'm with jrzook. I'll be doing exhaust, webber, better ignition coil and good plugs. I'm not after a drag car. Just a reliable rig 
|
|
| Author: | joel [ Tue Aug 16, 2011 10:12 am ] |
| Post subject: | Re: serria 1.3l more power |
sogone wrote: I'm with jrzook. I'll be doing exhaust, webber, better ignition coil and good plugs. I'm not after a drag car. Just a reliable rig
you suck and will never run a big block zook. no substitute for cubes noob
|
|
| Author: | MrRocky [ Tue Aug 16, 2011 10:12 am ] |
| Post subject: | Re: serria 1.3l more power |
joel wrote: JrZook wrote: stocker wrote: deegs88 wrote: I want more power out of my 1.3l engine.What kind of things can i do. Chuck it in the Bin, and Whack a Fuel injected G16B In it or you could listen to the voices in your head saying do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it Pift what is with this junk info? What is actually wrong with the G13? I reckon they are a bloody awesome engine! Yes the G16 EFI has more power etc but a descent condition g13 set up with a good exhaust and carb offers a very nice increase in torque and is very nice to drive. The G16 is a nice solution but is not the ONLY solution the original post he wanted more power, we assume he wants noticeable power increase. the g13b is a good performer as a solid reliable little sweat heart engine, but for a power increase that he will notice... put the 1.6 efi big block in. u mean a 16v 1.6 the 8v 1.6 sucks balls |
|
| Author: | joel [ Tue Aug 16, 2011 10:13 am ] |
| Post subject: | Re: serria 1.3l more power |
16v thats what im putting in. |
|
| Author: | JrZook [ Tue Aug 16, 2011 10:13 am ] |
| Post subject: | Re: serria 1.3l more power |
joel wrote: JrZook wrote: stocker wrote: deegs88 wrote: I want more power out of my 1.3l engine.What kind of things can i do. Chuck it in the Bin, and Whack a Fuel injected G16B In it or you could listen to the voices in your head saying do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it Pift what is with this junk info? What is actually wrong with the G13? I reckon they are a bloody awesome engine! Yes the G16 EFI has more power etc but a descent condition g13 set up with a good exhaust and carb offers a very nice increase in torque and is very nice to drive. The G16 is a nice solution but is not the ONLY solution the original post he wanted more power, we assume he wants noticeable power increase. the g13b is a good performer as a solid reliable little sweat heart engine, but for a power increase that he will notice... put the 1.6 efi big block in. If you compare a stocker 1300 and a 1300 with a descent exhaust and larger well tuned carb, such as a weber, you will be pleasantly surprised. Again have a look at some of the yankie sites from the fella's who have actually done these mods and have dyno sheets to show the actual differences they make. I had the 1300 setup described and it was a sweet little engine. Those mods made a noticeable difference. |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|