| auszookers.com https://auszookers.com/forum/ |
|
| Rpm tacho https://auszookers.com/forum/viewtopic.php?f=5&t=24917 |
Page 1 of 1 |
| Author: | zooky08 [ Thu Aug 18, 2011 7:57 am ] |
| Post subject: | Rpm tacho |
Hey I'm having drouble trying to get the rev tacho in my sierra to read. I've change the wires as many way you can but still does Nit move when I put my foot on the accelerator. Could it be a bugged cluster. Also I done falcon alt upgrade. Falcon alt thread said to use 70amp but I had shit loads of dual battery cable. Does any one see a problem running 100amp cable from alt to battery And what size fuse would be good with 100amp wire. Cheers |
|
| Author: | Ben_Sierra [ Thu Aug 18, 2011 8:03 am ] |
| Post subject: | Re: Rpm tacho |
zooky08 wrote: Also I done falcon alt upgrade.
Falcon alt thread said to use 70amp but I had shit loads of dual battery cable. Does any one see a problem running 100amp cable from alt to battery And what size fuse would be good with 100amp wire. Cheers Running larger cable than required is fine. Use the same fuse as you would with 70amp cable, it's there to protect more than just the cable... |
|
| Author: | zooky08 [ Thu Aug 18, 2011 8:54 am ] |
| Post subject: | Re: Rpm tacho |
Cheers Ben, any one no what's the go with rev reading. Sits just undering 1000rpm and doesn't go up or down. Stays in the one spot. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|