Just don't mount them how Shrockworks have mounted theirs. They've bolted to the body AND the chassis.
| auszookers.com https://auszookers.com/forum/ |
|
| Sliders. https://auszookers.com/forum/viewtopic.php?f=5&t=24921 |
Page 1 of 1 |
| Author: | worldo [ Thu Aug 18, 2011 9:29 am ] |
| Post subject: | Sliders. |
hey ive searched and found heaps of photos but none of where everyone drills through and whats used on inside of car. http://auszookers.com/index.php?name=Fo ... ht=sliders the shrockworks style is what im building. can anyone help me with a photo of how they did theres. cheers Ricky |
|
| Author: | Fatzook [ Thu Aug 18, 2011 9:33 am ] |
| Post subject: | Re: Sliders. |
Just don't mount them how Shrockworks have mounted theirs. They've bolted to the body AND the chassis.
|
|
| Author: | zooky08 [ Thu Aug 18, 2011 9:35 am ] |
| Post subject: | Re: Sliders. |
I'll be making these most likely next week. Im going to put crush tubes through the sill with a bolt, also plates on the floor. |
|
| Author: | worldo [ Thu Aug 18, 2011 9:37 am ] |
| Post subject: | Re: Sliders. |
not mounting to chassis just through sills and up through floor few bolts in each. has anyone got a photo of this? what does the crush tube do? sounds like i should use them |
|
| Author: | alien [ Thu Aug 18, 2011 9:41 am ] |
| Post subject: | Re: Sliders. |
crush tube does the opposite of its name =) when you tighten the nut on the bolt, the bolt has a tube around it to stop the nut going to a point where it will "crush" the body... |
|
| Author: | worldo [ Thu Aug 18, 2011 9:43 am ] |
| Post subject: | Re: Sliders. |
excellent and where do you buy these? |
|
| Author: | zooky08 [ Thu Aug 18, 2011 9:47 am ] |
| Post subject: | Re: Sliders. |
worldo wrote: excellent and where do you buy these? You can make them out of small tube
|
|
| Author: | worldo [ Thu Aug 18, 2011 9:50 am ] |
| Post subject: | Re: Sliders. |
so i drill the holes big enough for crush tube to go through the body. then put bolts through that and do em up. wouldnt that make crush tubes ridiculously small like 5mm long? |
|
| Author: | zooky08 [ Thu Aug 18, 2011 9:55 am ] |
| Post subject: | Re: Sliders. |
No the length of the sill so etc. From outside to inside of the car. 70mm-100mm long |
|
| Author: | worldo [ Thu Aug 18, 2011 9:57 am ] |
| Post subject: | Re: Sliders. |
oh yep got you thanks for all your help guys. |
|
| Author: | Fatzook [ Thu Aug 18, 2011 9:58 am ] |
| Post subject: | Re: Sliders. |
zooky08 wrote: No the length of the sill so etc. From outside to inside of the car. 70mm-100mm long
92-94mm 
|
|
| Author: | zooky08 [ Thu Aug 18, 2011 10:03 am ] |
| Post subject: | Re: Sliders. |
Fatzook wrote: zooky08 wrote: No the length of the sill so etc. From outside to inside of the car. 70mm-100mm long 92-94mm 
|
|
| Author: | Fatzook [ Thu Aug 18, 2011 10:37 am ] |
| Post subject: | Re: Sliders. |
zooky08 wrote: Fatzook wrote: zooky08 wrote: No the length of the sill so etc. From outside to inside of the car. 70mm-100mm long 92-94mm Neither was I
|
|
| Author: | zooky08 [ Thu Aug 18, 2011 10:59 am ] |
| Post subject: | Re: Sliders. |
Fatzook wrote: zooky08 wrote: Fatzook wrote: zooky08 wrote: No the length of the sill so etc. From outside to inside of the car. 70mm-100mm long 92-94mm Neither was I
Pm fatz 
|
|
| Author: | Damo [ Thu Aug 18, 2011 11:50 am ] |
| Post subject: | Re: Sliders. |
Fatzook wrote: zooky08 wrote: No the length of the sill so etc. From outside to inside of the car. 70mm-100mm long 92-94mm Pete's way of saying he's more zook-nerdy that you
|
|
| Author: | zooky08 [ Thu Aug 18, 2011 11:53 am ] |
| Post subject: | Re: Sliders. |
Damo wrote: Fatzook wrote: zooky08 wrote: No the length of the sill so etc. From outside to inside of the car. 70mm-100mm long 92-94mm Pete's way of saying he's more zook-nerdy that you
|
|
| Author: | Fatzook [ Thu Aug 18, 2011 12:39 pm ] |
| Post subject: | Re: Sliders. |
zooky08 wrote: Your sliders are properly the same design
Not evn close. Mine are WAY betterer
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|