they are exactly the same but different.
| auszookers.com https://auszookers.com/forum/ |
|
| Are 97 (2.0) and 92 (G16A) parts exchangeable? https://auszookers.com/forum/viewtopic.php?f=5&t=24961 |
Page 1 of 1 |
| Author: | Friski [ Sat Aug 20, 2011 4:40 am ] |
| Post subject: | Are 97 (2.0) and 92 (G16A) parts exchangeable? |
Hi All, Instead of a half cut I manage to get a decent 97 2.0 4 cylinder swb and wanted to know if the front and rear bars as well as suspension are interchangeable? Current car being 92 G16A swb with bull bars (front & rear), 2 inch body lift and 2 inch raised suspension. Thanks in advance, did do a search but nothing definate. Mic |
|
| Author: | alexvitara [ Sat Aug 20, 2011 6:17 am ] |
| Post subject: | Re: Are 97 (2.0) and 92 (G16A) parts exchangeable? |
sv420 will have a different chassis so the bars wont fit without mods. most of the suspension should be the same. |
|
| Author: | fordem [ Sat Aug 20, 2011 1:36 pm ] |
| Post subject: | Re: Are 97 (2.0) and 92 (G16A) parts exchangeable? |
alexvitara wrote: sv420 will have a different chassis so the bars wont fit without mods.
most of the suspension should be the same. Suspension should be the same means what - same as the first statement - won't fit without mods - or same as the SE416, so it will fit without mods? The chassis is wider and I'm pretty certain the suspension is different, wider cast control arms, as compared to pressed steel. |
|
| Author: | alexvitara [ Sun Aug 21, 2011 2:49 am ] |
| Post subject: | Re: Are 97 (2.0) and 92 (G16A) parts exchangeable? |
well calmini kit fits both so i assume the suspention is the same. i was told control arms are the same size, the extra width comes from the wider chassis. |
|
| Author: | vitzookman [ Sun Aug 21, 2011 3:29 am ] |
| Post subject: | Re: Are 97 (2.0) and 92 (G16A) parts exchangeable? |
Your 2inch suspension lift in the front will become a 1 inch lift. |
|
| Author: | atari4x4 [ Sun Aug 21, 2011 3:46 am ] |
| Post subject: | Re: Are 97 (2.0) and 92 (G16A) parts exchangeable? |
they are exactly the same but different.
|
|
| Author: | alexvitara [ Sun Aug 21, 2011 6:56 am ] |
| Post subject: | Re: Are 97 (2.0) and 92 (G16A) parts exchangeable? |
yeh springs wont be the same bcause the 2L is heavier |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|