For argument sake there is 8 head bolts....can't remember
8 2 4 6
7 1 3 5
That's how I have done it in the past anyway
| auszookers.com https://auszookers.com/forum/ |
|
| g13a head bolt tightening sequence https://auszookers.com/forum/viewtopic.php?f=5&t=24989 |
Page 1 of 1 |
| Author: | CompTruck [ Sun Aug 21, 2011 3:39 am ] |
| Post subject: | g13a head bolt tightening sequence |
hi guys. does anyone know the head bolt tightening sequence? wanna go downstairs and start putting it together found it now its 7 5 1 3 9 10 4 2 6 8 |
|
| Author: | Rusho [ Sun Aug 21, 2011 4:06 am ] |
| Post subject: | Re: g13a head bolt tightening sequence |
For argument sake there is 8 head bolts....can't remember
8 2 4 6 7 1 3 5 That's how I have done it in the past anyway
|
|
| Author: | shane1992 [ Sun Aug 21, 2011 4:38 am ] |
| Post subject: | Re: g13a head bolt tightening sequence |
start from centre and go around clockwise or whatever.. |
|
| Author: | JrZook [ Sun Aug 21, 2011 1:29 pm ] |
| Post subject: | Re: g13a head bolt tightening sequence |
shane1992 wrote: start from centre and go around clockwise or whatever..
It's not a case of whatever mate.... That leads to possible warped/cracked heads or blown headgaskets... Start from the inside, cross to diagonal bolts and work your way out. Should have 3 torque settings to tighten up in sequence. Start by placing the bolts, then do them up finger tight then do the sequence with your torque wrench. Eg: 10 4 2 6 8 7 5 1 3 9 |
|
| Author: | CompTruck [ Sun Aug 21, 2011 2:10 pm ] |
| Post subject: | Re: g13a head bolt tightening sequence |
ok. might even by a manual. got heaps to do on the beast. whats the best one? |
|
| Author: | neofitou [ Sun Aug 21, 2011 8:47 pm ] |
| Post subject: | Re: g13a head bolt tightening sequence |
I did it only a few months ago.. but cant remember. http://www.suzukiinfo.com/ pdf of the manuals. |
|
| Author: | shane1992 [ Sun Aug 21, 2011 10:33 pm ] |
| Post subject: | Re: g13a head bolt tightening sequence |
JrZook wrote: shane1992 wrote: start from centre and go around clockwise or whatever.. It's not a case of whatever mate.... That leads to possible warped/cracked heads or blown headgaskets... Start from the inside, cross to diagonal bolts and work your way out. Should have 3 torque settings to tighten up in sequence. Start by placing the bolts, then do them up finger tight then do the sequence with your torque wrench. Eg: 10 4 2 6 8 7 5 1 3 9 by saying 'whatever' I didn't mean do whatever, I clearly meant, all other similar possible sequences like the one you stated etc.... I don't think there is anyone on this forum that would be dumb enough to think they can do whatever bolts up in stupid sequences. |
|
| Author: | JrZook [ Mon Aug 22, 2011 2:43 am ] |
| Post subject: | Re: g13a head bolt tightening sequence |
shane1992 wrote: JrZook wrote: shane1992 wrote: start from centre and go around clockwise or whatever.. It's not a case of whatever mate.... That leads to possible warped/cracked heads or blown headgaskets... Start from the inside, cross to diagonal bolts and work your way out. Should have 3 torque settings to tighten up in sequence. Start by placing the bolts, then do them up finger tight then do the sequence with your torque wrench. Eg: 10 4 2 6 8 7 5 1 3 9 by saying 'whatever' I didn't mean do whatever, I clearly meant, all other similar possible sequences like the one you stated etc.... I don't think there is anyone on this forum that would be dumb enough to think they can do whatever bolts up in stupid sequences. I dunno, but I was pretty sure you said something similar about head bolts tensions a while back, hence my conclusion...... Edit found it from your build thread: shane1992 wrote: Quick question, how much do you tourque the head bolts up to? They are allen key bolts to by the way... Do I just do it farking tight? Couldnt find the answer in the manual.....
Having troubles with the cam at the moment though.... |
|
| Author: | Damo [ Mon Aug 22, 2011 2:49 am ] |
| Post subject: | Re: g13a head bolt tightening sequence |
CompTruck wrote: ok. might even by a manual. got heaps to do on the beast. whats the best one?
Suzuki Factory Service Manual FTW. AS mentioned, you can get it on suzukiinfo |
|
| Author: | CompTruck [ Mon Aug 22, 2011 6:22 am ] |
| Post subject: | Re: g13a head bolt tightening sequence |
thanks for the manual link its 7 5 1 3 9 10 4 2 6 8 |
|
| Author: | TryHard [ Mon Aug 22, 2011 6:26 am ] |
| Post subject: | Re: g13a head bolt tightening sequence |
haha thanks for the info il need it this weekend 
|
|
| Author: | shane1992 [ Mon Aug 22, 2011 7:12 am ] |
| Post subject: | Re: g13a head bolt tightening sequence |
JrZook wrote: shane1992 wrote: JrZook wrote: shane1992 wrote: start from centre and go around clockwise or whatever.. It's not a case of whatever mate.... That leads to possible warped/cracked heads or blown headgaskets... Start from the inside, cross to diagonal bolts and work your way out. Should have 3 torque settings to tighten up in sequence. Start by placing the bolts, then do them up finger tight then do the sequence with your torque wrench. Eg: 10 4 2 6 8 7 5 1 3 9 by saying 'whatever' I didn't mean do whatever, I clearly meant, all other similar possible sequences like the one you stated etc.... I don't think there is anyone on this forum that would be dumb enough to think they can do whatever bolts up in stupid sequences. I dunno, but I was pretty sure you said something similar about head bolts tensions a while back, hence my conclusion...... Edit found it from your build thread: shane1992 wrote: Quick question, how much do you tourque the head bolts up to? They are allen key bolts to by the way... Do I just do it farking tight? Couldnt find the answer in the manual..... Having troubles with the cam at the moment though.... Was asking how much to tourque it up to, not the sequence..... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|