nato78 wrote:
Only if your Sierra has a vitara motor. The inlet and outlet manifolds are on different sides of the head.
uummm no they aren't.
| auszookers.com https://auszookers.com/forum/ |
|
| will vitara headers fit sierra https://auszookers.com/forum/viewtopic.php?f=5&t=25026 |
Page 1 of 1 |
| Author: | ozsteve [ Mon Aug 22, 2011 5:32 am ] |
| Post subject: | will vitara headers fit sierra |
as it says ,i was offered some new headers off a vitara to go on my sierra , will it work |
|
| Author: | nato78 [ Mon Aug 22, 2011 6:30 am ] |
| Post subject: | Re: will vitara headers fit sierra |
Only if your Sierra has a vitara motor. The inlet and outlet manifolds are on different sides of the head. |
|
| Author: | ozsteve [ Mon Aug 22, 2011 9:06 am ] |
| Post subject: | Re: will vitara headers fit sierra |
ahh cool thanks mate |
|
| Author: | shep [ Mon Aug 22, 2011 9:08 am ] |
| Post subject: | Re: will vitara headers fit sierra |
nato78 wrote: Only if your Sierra has a vitara motor. The inlet and outlet manifolds are on different sides of the head.
uummm no they aren't.
|
|
| Author: | Gwagensteve [ Mon Aug 22, 2011 9:32 am ] |
| Post subject: | Re: will vitara headers fit sierra |
x2 ???? Vitara and sierra carby headers are interchangeable. SOHC EFI heads are different to carby, but they are all the same amongst themselves (Baleno, swift, Vitara etc) DOHC heads (G13B GTi) are different to both. Steve. |
|
| Author: | BlueSuzy [ Mon Aug 22, 2011 10:09 am ] |
| Post subject: | Re: will vitara headers fit sierra |
and chassis clearance can be a problem. More room in a vit, so they can make them wider. |
|
| Author: | Gwagensteve [ Mon Aug 22, 2011 10:15 am ] |
| Post subject: | Re: will vitara headers fit sierra |
True. Clearance can be tight around the engine mount. Steve. |
|
| Author: | vandle [ Mon Aug 22, 2011 11:05 am ] |
| Post subject: | Re: will vitara headers fit sierra |
Clearance can be more of a problem near the front spring rear mount had to modify the end of the 2-1 collector for more clearance. Each make may vary. Mine clears the engine mounts but its close. |
|
| Author: | SuziBlu [ Mon Aug 22, 2011 1:03 pm ] |
| Post subject: | Re: will vitara headers fit sierra |
shep wrote: nato78 wrote: Only if your Sierra has a vitara motor. The inlet and outlet manifolds are on different sides of the head. uummm no they aren't. Thanks for clearing that up, just knocked off, an having a beer, read the reply an thought, er, how many have i had. |
|
| Author: | nato78 [ Mon Aug 22, 2011 3:09 pm ] |
| Post subject: | Re: will vitara headers fit sierra |
Oh well, I guess I'm just a dick head then, but I thought all the vit snorkels I see and the sierras running vit engines with snorkels have the snorkels mounted on the passenger side pilar? Or am I just imagining things again? Wouldn't be the first time |
|
| Author: | 303zuke [ Mon Aug 22, 2011 3:42 pm ] |
| Post subject: | Re: will vitara headers fit sierra |
nato78 wrote: I thought all the vit snorkels I see and the sierras running vit engines with snorkels have the snorkels mounted on the passenger side pilar? Or am I just imagining things again? Wouldn't be the first time
The 16V Efi engines have the airfilter in the LHS of the engine bay, but the Inlet manifold is still on the driver's sdie and the Exhaust is on the Pass side. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|