auszookers.com
https://auszookers.com/forum/

carby vacuum line problem
https://auszookers.com/forum/viewtopic.php?f=5&t=25032
Page 1 of 1

Author:  Aaron [ Mon Aug 22, 2011 7:20 am ]
Post subject:  carby vacuum line problem

hey guys i got a new/ second hand carby for my car the other day and in my rush to fit it i pulled all the vacume hoses off and now i dont know where they go :helloo: so i wacked em all on in some retard order and she isnt running right so if someone has a diagram or pictures of where they go that would be sweet.

btw car is a 1988 suzuki sierra g13a carby

Author:  Aaron [ Sat Aug 27, 2011 7:29 am ]
Post subject:  Re: carby vacume line problem

Hey guys im still having trouble with it when i pull up to the traffic lights it will just stop and when im driving along ( mainly in low range ) and take my foot off the accelerator to slow down a bit then go to accelerate again it bunnyhops and gives a mild whip lash :D

Author:  Rhino [ Sat Aug 27, 2011 7:50 am ]
Post subject:  Re: carby vacume line problem

If you can wait till tomorrow arvo I'll get some pics for ya mate.
Does yours have the little vacume valve on the airbox or is it manual??

Author:  Aaron [ Sat Aug 27, 2011 9:12 am ]
Post subject:  Re: carby vacume line problem

ummm it has a vacume line on the air box but it never went to the carby i dont think HAHAHA i really should have labbeled it, thanks mate Aaron

Author:  zooky08 [ Sat Aug 27, 2011 9:19 am ]
Post subject:  Re: carby vacume line problem

this may help a bit

http://auszookers.com/index.php?name=Fo ... carby+hose

Author:  steve125 [ Sun Aug 28, 2011 3:18 am ]
Post subject:  Re: carby vacume line problem

This is a '95 Sierra so it may be a little different, but here goes.

#1 goes to the airbox
#2 goes to the switch labelled #3
#4 also goes to #3
#5 (diaphram just out of shot) goes to the thermostat
Image

#6 goes to the engine side of carby
#9 goes to switch on firewall just above brake booster
Image

#7 goes to the distributor
#8 goes to charcoal canister
Image

#10 goes to switch on firewall above brake booster, same as #9
Image

Author:  Aaron [ Sun Aug 28, 2011 4:19 am ]
Post subject:  Re: carby vacume line problem

thanks alot for that one mate i owe you one thats for sure.

Edit: this should go into tech very usefull

Author:  zooky08 [ Sun Aug 28, 2011 5:35 am ]
Post subject:  Re: carby vacume line problem

I have two #3 switches and no firewall switch so can't work out some hoses :(

Author:  want33s [ Tue Mar 20, 2012 7:17 am ]
Post subject:  Re: carby vacuum line problem

The firewall mounted switch only controls vacuum for the AC idle up.

Author:  Aaron [ Tue Mar 20, 2012 7:26 pm ]
Post subject:  Re: carby vacuum line problem

there is a few different configurations ill get some pics of mine tommorow, i copied my brothers sierra.

Author:  Phillg [ Sat Nov 05, 2016 1:36 pm ]
Post subject:  Re: carby vacuum line problem

Hi i am new on here , but was wondering if someone had some idea on how the vacuum lines run on a 1993 8v vitara

Author:  seb7701 [ Thu Feb 02, 2017 8:32 pm ]
Post subject:  Re: carby vacuum line problem

This is really great - I was wondering how the heck to work out the spaghetti of hose on mine too!!

Author:  Greencomet0 [ Sun Feb 05, 2017 5:51 pm ]
Post subject:  Re: carby vacuum line problem

Hi could somebody here please give me a hand with my vacuum hoses aswell? I have a 1990 1.3jx and none of the pictures seem to match what I have and aren't sure how to work it out

Author:  jdk81 [ Mon Feb 06, 2017 7:38 am ]
Post subject:  Re: carby vacuum line problem

Take some pictures for us.

Host the pics in photobucket, or some other site, and post the links here.

Author:  Greencomet0 [ Mon Feb 06, 2017 12:59 pm ]
Post subject:  Re: carby vacuum line problem

Here's a link to the photo bucket
http://photobucket.com/uploadmedia/
Hopefully I've done that correctly as I haven't used such a service before

Thanks in advance

Author:  Greencomet0 [ Mon Feb 06, 2017 2:32 pm ]
Post subject:  Re: carby vacuum line problem

http://photobucket.com/uploadmedia/

Here's the link. I'm not sure if I posted it correctly the first time. Please let me know if you can view the pictures

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/