peteandliz wrote:
does it ping high in the rpm
Can't really tell cos my taco doesn't work 
But to me it sounds like it has more rpm then the usuall idle rpm
| auszookers.com https://auszookers.com/forum/ |
|
| Backfiring G16a https://auszookers.com/forum/viewtopic.php?f=5&t=25120 |
Page 1 of 1 |
| Author: | zooky08 [ Wed Aug 24, 2011 8:33 pm ] |
| Post subject: | Backfiring G16a |
Could incorrect valve clearances course backfiring at idle? The car backfires quite alot at idle, I'm getting a new exhaust put on it on Monday and I don't want it to blow my new muffler apart. |
|
| Author: | zukmeista [ Wed Aug 24, 2011 8:36 pm ] |
| Post subject: | Re: Backfiring G16a |
Incorrect ignition setup. |
|
| Author: | zooky08 [ Wed Aug 24, 2011 8:55 pm ] |
| Post subject: | Re: Backfiring G16a |
All ignition wires are in there right spot |
|
| Author: | peteandliz [ Wed Aug 24, 2011 8:56 pm ] |
| Post subject: | Re: Backfiring G16a |
my guess would be your timing is out |
|
| Author: | zooky08 [ Wed Aug 24, 2011 9:14 pm ] |
| Post subject: | Re: Backfiring G16a |
could be need retarding i reckon. it doesnt backfiring accelerating or decel? only if it sits there and idles for a bit. |
|
| Author: | peteandliz [ Wed Aug 24, 2011 9:51 pm ] |
| Post subject: | Re: Backfiring G16a |
does it ping high in the rpm |
|
| Author: | zooky08 [ Wed Aug 24, 2011 10:15 pm ] |
| Post subject: | Re: Backfiring G16a |
peteandliz wrote: does it ping high in the rpm Can't really tell cos my taco doesn't work But to me it sounds like it has more rpm then the usuall idle rpm
|
|
| Author: | peteandliz [ Wed Aug 24, 2011 10:23 pm ] |
| Post subject: | Re: Backfiring G16a |
is it bacfiring out the exhaust or the carby ??? |
|
| Author: | zooky08 [ Wed Aug 24, 2011 10:26 pm ] |
| Post subject: | Re: Backfiring G16a |
peteandliz wrote: is it bacfiring out the exhaust or the carby ??? Exhaust
|
|
| Author: | peteandliz [ Wed Aug 24, 2011 10:29 pm ] |
| Post subject: | Re: Backfiring G16a |
have u cheacked all of your spark plugs make sure there working |
|
| Author: | royce [ Wed Aug 24, 2011 10:34 pm ] |
| Post subject: | Re: Backfiring G16a |
if its ok in all but idle check your mixture is right, your plugs are clean and your leads are good |
|
| Author: | zooky08 [ Wed Aug 24, 2011 10:36 pm ] |
| Post subject: | Re: Backfiring G16a |
royce wrote: if its ok in all but idle check your mixture is right, your plugs are clean and your leads are good I'll check all that and report back thanks
|
|
| Author: | zooky08 [ Wed Aug 24, 2011 11:20 pm ] |
| Post subject: | Re: Backfiring G16a |
So I think it was just dirty plugs, No. 3 lead fell of and it start back firing then until I put it back on. Now I just got to fix high idle and rpm taco
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|