auszookers.com :: View topic - Jimny arb locker broke =[

auszookers.com https://auszookers.com/forum/

Jimny arb locker broke =[ https://auszookers.com/forum/viewtopic.php?f=5&t=25256	Page 1 of 1

Author:	Benz [ Mon Aug 29, 2011 11:57 am ]
Post subject:	Jimny arb locker broke =[
last week after a quick wheel after work it seems I have broken my locker.... the problem is it now works too well... it cant be unlocked! no grinding or clunks so I guess i haven't smashed it to bits but something is not right. drained the oil and didn't find any chunks. also lifting both rear wheels and rolling the wheels around doesn't work. any ideas? or am i going to have to pull the diff out? poo =[

Author:	atari4x4 [ Mon Aug 29, 2011 12:00 pm ]
Post subject:	Re: Jimny arb locker broke =[
the bullshit plastic piston/cage has probably broken like mine did. http://auszookers.com/index.php?name=Fo ... light=rd88

Author:	Benz [ Mon Aug 29, 2011 12:03 pm ]
Post subject:	Re: Jimny arb locker broke =[
hmm yeah i have seen them bake in other peoples lockers b4... i was hoping it wouldn't be that

Author:	Benz [ Mon Aug 29, 2011 12:10 pm ]
Post subject:	Re: Jimny arb locker broke =[
what does that bit of plastic cost? properly millions.... edit: did i just read $220 on that thread?

Author:	atari4x4 [ Mon Aug 29, 2011 12:18 pm ]
Post subject:	Re: Jimny arb locker broke =[
I can't remember the actual cost of the piston but it was something like $220 all up & about 180 of that was labour. i pulled the diff & left it on their counter. these are the parts replaced from the other thread, most of it was replaced due to it being pulled apart. parts replaced: Quad Ring, XR133V75 x 2 part number 160235 Locking Tab 6mm x8 part number 150402 U Ring - RD 75/87/88/118 x 1 part number 160306 Piston, G Type x1 part number 040201

Author:	Benz [ Mon Aug 29, 2011 12:21 pm ]
Post subject:	Re: Jimny arb locker broke =[
wow thanks atari that will help me alot. i plan on giving this a crack myself

Author:	atari4x4 [ Mon Aug 29, 2011 12:24 pm ]
Post subject:	Re: Jimny arb locker broke =[
that was for a RD88

Author:	Benz [ Mon Aug 29, 2011 12:26 pm ]
Post subject:	Re: Jimny arb locker broke =[
yeah rear locker in a jimny is a rd88

Author:	atari4x4 [ Mon Aug 29, 2011 12:35 pm ]
Post subject:	Re: Jimny arb locker broke =[
Benz2369 wrote: yeah rear locker in a jimny is a rd88 hmmm, from memory you bought those new second hand/new in box of an adelaide AZ member? what are the chances of those both being from the same batch? i've got the serial number written down, pretty sure they would have come from the same store about the same time. makes me mad knowing they dicked me around for months on end sending it to head office. :edit: maybe flick a PM to joeblow if he doesn't post here to see if you can get a 2nd opinion.

Author:	swifty_ano [ Mon Aug 29, 2011 8:21 pm ]
Post subject:	Re: Jimny arb locker broke =[
Should of went chinasoong.

Author:	Benz [ Mon Aug 29, 2011 11:42 pm ]
Post subject:	Re: Jimny arb locker broke =[
haha chinasoong... has anyone broken any of them yet? why did it take months at head office?

Author:	Lockie666 [ Tue Aug 30, 2011 12:39 am ]
Post subject:	Re: Jimny arb locker broke =[
Sounds like atari is right. They've got rid of the plastic pistons now, I was the last one to get an rd88 with one... How old os the locker? You might be able to get warranty.

Author:	tanshi [ Tue Aug 30, 2011 12:42 am ]
Post subject:	Re: Jimny arb locker broke =[
my sierra diff broke the plastic piston. if you can puill it out your self the part cost me about $20

Author:	atari4x4 [ Tue Aug 30, 2011 12:51 am ]
Post subject:	Re: Jimny arb locker broke =[
the copylocker would be running the same plastic piston as they're using the older design. it went to head office for them to try & do a warranty claim on it for me as it was just out off the 12 months.

Author:	Benz [ Tue Aug 30, 2011 10:05 am ]
Post subject:	Re: Jimny arb locker broke =[
yeah no warranty on mine =[ will give it a go in a month or two. don't need the car as a daily atm and i'm busy with other things anyway. thanks all

Author:	Benzban [ Fri Oct 21, 2011 11:44 am ]
Post subject:	Re: Jimny arb locker broke =[
okay so i have the diff out and in pieces the little tabs on the piston have broken off new one is on it's way. cost... $10.95 will get it back together next weekend. i'm also changing my thrust bearing but have run int a wall with that one with a seized bolt. oh mechanics are fun!

Author:	atari4x4 [ Fri Oct 21, 2011 11:52 am ]
Post subject:	Re: Jimny arb locker broke =[
That's a bitch Ben. Knew it would be the problem... but at least it's a cheap fix. pm steve or royce if you've forgotten your password.

Author:	Benzban [ Fri Oct 21, 2011 12:00 pm ]
Post subject:	Re: Jimny arb locker broke =[
haha yeah think i will keep this one name has less shit numbers

Author:	Benzban [ Fri Oct 21, 2011 12:02 pm ]
Post subject:	Re: Jimny arb locker broke =[
oh and the diff was very clean and showed no real sings of wear =]

Author:	atari4x4 [ Fri Oct 21, 2011 12:20 pm ]
Post subject:	Re: Jimny arb locker broke =[
can't believe that ARB thought it would be a suitable material to use, did yours look like it was really poorly cast? surely someone would have been able to trim your old username of the shit numbers if you asked nicely but then again, you might end up with something like steak_knife or something_else.

Author:	Benzban [ Fri Oct 21, 2011 12:31 pm ]
Post subject:	Re: Jimny arb locker broke =[
yeah it does look a bit shitty... the go to all the work of machining the whole thing out of steal... then put a crappy plastic piston in it will post up photo's some time this weekend haha nah i did loose my password too

Author:	steak_knife [ Fri Oct 21, 2011 6:54 pm ]
Post subject:	Re: Jimny arb locker broke =[
Benz wrote: haha yeah think i will keep this one name has less shit numbers Might want to tell em....

Author:	steak_knife [ Fri Oct 21, 2011 7:06 pm ]
Post subject:	Re: Jimny arb locker broke =[
atari4x4 wrote: can't believe that ARB thought it would be a suitable material to use, did yours look like it was really poorly cast? surely someone would have been able to trim your old username of the shit numbers if you asked nicely but then again, you might end up with something like steak_knife or something_else. But it's not like I didn't already get called that... & stalker, & shut up f*#k witt...

Author:	Benz [ Fri Dec 09, 2011 8:54 am ]
Post subject:	Re: Jimny arb locker broke =[
ah i'm back and still waiting on parts for my locker!!!! arb are hopeless.... should get it next week..... now just a Q or two. how hard is it to put the diff back together and get it right? i'm a little worried about lining the crown and pinion up correctly. please help

Author:	atari4x4 [ Fri Dec 09, 2011 9:04 am ]
Post subject:	Re: Jimny arb locker broke =[
you just need to reset the pre-load right on the bearings to get the same backlash as previous. this might help somewhat. http://chromatographyonline.findanalyti ... ?id=277669

Author:	Benz [ Fri Dec 09, 2011 9:25 am ]
Post subject:	Re: Jimny arb locker broke =[
yeah okay .006 - .004 right... i don't have one of those backlash checker thingies

Author:	Benz [ Thu Jan 19, 2012 1:08 pm ]
Post subject:	Re: Jimny arb locker broke =[
i got a shop to set the diff back up. and the jimny is back on the road thanks to all that help. haha arb sent me a free tyre deflater... they sell for $70 in all my parts cost $25 with freight.... Score! so happy to have my jimny back =]

Author:	ZookFan [ Fri Jan 20, 2012 9:27 am ]
Post subject:	Re: Jimny arb locker broke =[
Yay! took a while mate! Do you have another car for work?

Author:	Benz [ Fri Jan 20, 2012 12:26 pm ]
Post subject:	Re: Jimny arb locker broke =[
haha yeah that's why it took so long... I was spending all my money on another car... and then the part took 2 months when i finally got my act together

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/