| auszookers.com https://auszookers.com/forum/ |
|
| Rear gearbox seal. https://auszookers.com/forum/viewtopic.php?f=5&t=25351 |
Page 1 of 1 |
| Author: | strutts [ Fri Sep 02, 2011 12:57 am ] |
| Post subject: | Rear gearbox seal. |
Hey guys, gotta change the rear gear box seal in my 85 drove, any idea whats the easiest way? I got no idea about cars really... slowly learning on my nugget of a car seeing I'm having a shitload of problems with it... |
|
| Author: | Fatzook [ Fri Sep 02, 2011 1:16 am ] |
| Post subject: | Re: Rear gearbox seal. |
Dump the gearbox oil. Take out the jack shaft. Use a seal pick to remove the old one. Spray the area with brake clean or shelite to remove gunk. Wipe and re-fit new seal. Replace jack shaft and re-fill box. All of this is made infinately easier if you have access to a hoist 
|
|
| Author: | steak_knife [ Fri Sep 02, 2011 7:21 am ] |
| Post subject: | Re: Rear gearbox seal. |
Fatzook wrote: Dump the gearbox oil. Take out the jack shaft. Use a seal pick to remove the old one. Spray the area with brake clean or shelite to remove gunk. Wipe and re-fit new seal. Replace jack shaft and re-fill box.
All of this is made infinately easier if you have access to a hoist grease the inner seal, or it will only last 100km's....
|
|
| Author: | Fatzook [ Fri Sep 02, 2011 7:27 am ] |
| Post subject: | Re: Rear gearbox seal. |
steak_knife wrote: Fatzook wrote: Dump the gearbox oil. Take out the jack shaft. Use a seal pick to remove the old one. Spray the area with brake clean or shelite to remove gunk. Wipe and re-fit new seal. Replace jack shaft and re-fill box. All of this is made infinately easier if you have access to a hoist grease the inner seal, or it will only last 100km's.... Well I skipped over that step, cos the last half dozen seal I've bought were genuine, and come pre-lubed
|
|
| Author: | tonyevans [ Fri Sep 02, 2011 7:27 am ] |
| Post subject: | Re: Rear gearbox seal. |
Fatzook wrote: All of this is made infinately easier if you have access to a hoist
Or take the body off 
|
|
| Author: | Built4thrashing [ Fri Sep 02, 2011 8:35 am ] |
| Post subject: | Re: Rear gearbox seal. |
I might have the seal you need. Its an easy job. to do. pm me if ya need help. |
|
| Author: | steak_knife [ Fri Sep 02, 2011 8:59 am ] |
| Post subject: | Re: Rear gearbox seal. |
Fatzook wrote: steak_knife wrote: Fatzook wrote: Dump the gearbox oil. Take out the jack shaft. Use a seal pick to remove the old one. Spray the area with brake clean or shelite to remove gunk. Wipe and re-fit new seal. Replace jack shaft and re-fill box. All of this is made infinately easier if you have access to a hoist grease the inner seal, or it will only last 100km's.... Well I skipped over that step, cos the last half dozen seal I've bought were genuine, and come pre-lubed But not all do my Lil short arsed friend.... 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|