auszookers.com
https://auszookers.com/forum/

sj80 cv's
https://auszookers.com/forum/viewtopic.php?f=5&t=25365		 Page 1 of 1
Author:  fishboy114 [ Fri Sep 02, 2011 9:16 am ]
Post subject:  sj80 cv's
does anyone know how i would go about getting cv's or possibly more spline cv's for my sj80
Author:  boostedbrick [ Fri Sep 02, 2011 9:22 am ]
Post subject:  Re: sj80 cv's
You want stock CVs? or better ones? Lowrange do chromo 26 Spline units for around $300 to your door..
Author:  joeblow [ Fri Sep 02, 2011 9:28 am ]
Post subject:  Re: sj80 cv's
not for coilys they don't.
Author:  skyman [ Fri Sep 02, 2011 9:32 am ]
Post subject:  Re: sj80 cv's
or the SJ 80? Isn't that the coily?
Author:  Rusho [ Fri Sep 02, 2011 9:35 am ]
Post subject:  Re: sj80 cv's
joeblow wrote:
not for coilys they don't.


x 2 Stupid coily's.....sure you would own one if them :roll:
Author:  fishboy114 [ Fri Sep 02, 2011 9:36 am ]
Post subject:  Re: sj80 cv's
yeah my sj80 is a coily and im after stronger cv's but even stock ones will do for a spare set
Author:  boostedbrick [ Fri Sep 02, 2011 9:36 am ]
Post subject:  Re: sj80 cv's
joeblow wrote:
not for coilys they don't.


Eh one of those coily things... :crazy:
Author:  Rusho [ Fri Sep 02, 2011 9:58 am ]
Post subject:  Re: sj80 cv's
99% Sure there is no after market stronger CV's :cry: Possible leafy wide track front diff conversion :wink: Then the choice of after market parts is an open slather 8)
Author:  fishboy114 [ Fri Sep 02, 2011 10:09 am ]
Post subject:  Re: sj80 cv's
sj80 just have to be difficult for mods and parts dont they i wanted to get leafy cv's and pinions but they wont fit apparently :(
Author:  skyman [ Fri Sep 02, 2011 10:19 am ]
Post subject:  Re: sj80 cv's
Can a WT axle be stuffed under an SJ80?If so, that would be the go for you. here WT axles are cheap.
Author:  Rusho [ Fri Sep 02, 2011 10:23 am ]
Post subject:  Re: sj80 cv's
It can be done. It would be a lot of fidly work to set it up properly but well worth it if you want after market parts.
Author:  runtbase [ Fri Sep 02, 2011 8:44 pm ]
Post subject:  Re: sj80 cv's
Colliy axels are longer. And the stub axle on a coily is shorter. So you don't have much you can do.
Author:  Rusho [ Fri Sep 02, 2011 9:48 pm ]
Post subject:  Re: sj80 cv's
By axle, I meant housing also 8)
Author:  skyman [ Fri Sep 02, 2011 10:22 pm ]
Post subject:  Re: sj80 cv's
It is a shame they could not keep the axle shafts standard..bastages.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/