Ebay
I'm due for a set too.
| auszookers.com https://auszookers.com/forum/ |
|
| Pitman Arm https://auszookers.com/forum/viewtopic.php?f=5&t=25387 |
Page 1 of 1 |
| Author: | stocker [ Sat Sep 03, 2011 7:31 am ] |
| Post subject: | Pitman Arm |
Just had a look at my pitman arm in the Vit. and the joints on the end are pretty flogged out. Tie rod ends could probably use replacing too. I noticed the pitman arm joints look welded in. does anyone know where i could get a new one, also Tie rod ends -Rob |
|
| Author: | buzbox [ Sat Sep 03, 2011 7:50 am ] |
| Post subject: | Re: Pitman Arm |
Ebay
I'm due for a set too. |
|
| Author: | stocker [ Sat Sep 03, 2011 8:06 am ] |
| Post subject: | Re: Pitman Arm |
haha... i'll check it out, cheers matey. lol loose pitman arms make for fun over Corrugations or so i found... |
|
| Author: | royce [ Sat Sep 03, 2011 8:11 am ] |
| Post subject: | Re: Pitman Arm |
pitman arm is the arm on the steering box Do you mean draglink? There is a thread on here about a guy got ebay stuff and it hit the diff, I think the inner tierods were made wrong |
|
| Author: | atari4x4 [ Sat Sep 03, 2011 8:16 am ] |
| Post subject: | Re: Pitman Arm |
what are you calling a pitman arm? you should only have one & it's attached to the steering box & draglink, the other side of the drag link is supported by the idler arm & attached to the drag link are the tie rods, which I managed to snap on last night & attached to the tie rods are the tie rod ends that attach to the knuckles. $50 from repco today 
i'm pretty certain there shouldn't be any welded parts. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|