auszookers.com
https://auszookers.com/forum/

Lwb trayback specs
https://auszookers.com/forum/viewtopic.php?f=5&t=25466
Page 1 of 1

Author:  Drova [ Mon Sep 05, 2011 7:53 am ]
Post subject:  Lwb trayback specs

Am interested in building up a lwb trayback,
I was wondering what is the standard tray
Length, and whats the wheelbase? Thanks Luke

Author:  want33s [ Mon Sep 05, 2011 8:08 am ]
Post subject:  Re: Lwb trayback specs

I have a tray here off a ute..1550 wide by 1800 long.
Wheelbase is 94 inches or 2389 mm.

Author:  Fatzook [ Mon Sep 05, 2011 8:12 am ]
Post subject:  Re: Lwb trayback specs

Suzuki have the wheelbase at 93.5". The trays are usually 6'x5', but they do vary a little.

I've made my new tray at 1300x1650 to cut down on the overhangs.

Author:  Drova [ Mon Sep 05, 2011 8:15 am ]
Post subject:  Re: Lwb trayback specs

Thanks mate very helpfull

Author:  mnemonix [ Mon Sep 05, 2011 8:17 am ]
Post subject:  Re: Lwb trayback specs

The tray on my 95 maruti is 1550x1500. Most of the later maruti's are O'Briens trailer body branded trays in this size.
The earlier marutis are slightly longer.

Author:  Fatzook [ Mon Sep 05, 2011 8:26 am ]
Post subject:  Re: Lwb trayback specs

mnemonix wrote:
The tray on my 95 maruti is 1550x1500. Most of the later maruti's are O'Briens trailer body branded trays in this size.
The earlier marutis are slightly longer.


I was gonna say that all Marutis have a shorter tray than jap sierras. Usually because the "cut" is much further cack on the maruti cab than where the rear wall finishes on the cab chassis jap utes.

Author:  mnemonix [ Mon Sep 05, 2011 8:40 am ]
Post subject:  Re: Lwb trayback specs

Yep thats it. You trade off a shorter tray length for more leg room in the cabin.
Of course you could sacrifice the departure angle if you needed a larger tray, but it would limit your offroad ability greatly.

As it is with a 5'x5' tray, I still have more rear overhang that I would like.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/