Undo the bolts
Then hit it lightly with a big hammer. Assuming its the end with bolts thats stuck.
| auszookers.com https://auszookers.com/forum/ |
|
| Jack shaft seized https://auszookers.com/forum/viewtopic.php?f=5&t=25578 |
Page 1 of 1 |
| Author: | zammit [ Thu Sep 08, 2011 5:55 am ] |
| Post subject: | Jack shaft seized |
Any tips on how to remove my jack shaft? |
|
| Author: | boostedbrick [ Thu Sep 08, 2011 6:46 am ] |
| Post subject: | Re: Jack shaft seized |
Undo the bolts
Then hit it lightly with a big hammer. Assuming its the end with bolts thats stuck. |
|
| Author: | christover1 [ Thu Sep 08, 2011 7:25 am ] |
| Post subject: | Re: Jack shaft seized |
I had to drop one side of the trans case mounts to get mine out, that is till I put body lift in. If its modded then is possible its too long and jammed in. Or I'm confused what actual problem is ? |
|
| Author: | bazook [ Thu Sep 08, 2011 9:32 am ] |
| Post subject: | Re: Jack shaft seized |
make sure you drain the gearbox first too 
|
|
| Author: | zammit [ Thu Sep 08, 2011 10:47 am ] |
| Post subject: | Re: Jack shaft seized |
hahaha thanks guys got it out agers ago haha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|