auszookers.com
https://auszookers.com/forum/

Jimny lean??
https://auszookers.com/forum/viewtopic.php?f=5&t=25734
Page 1 of 1

Author:  monley [ Mon Sep 12, 2011 7:38 am ]
Post subject:  Jimny lean??

:helloo:

My jimny has a bit of a lean...well a 30mm lean, over to the drivers side :? . I can not figure out what is causing this, the front springs got replaced 2 weeks, with 80mm Tough dog HD coils (+30mm coils spacers in the front) and the rear has tough dog 80mm lifted coils to.

It has been this way for about 3-4 months now, and i can not find any reason for the "lean", i have checked the coils towers and they all seem straighten and UN-damged.

Could the rear drivers side coil be sagged even though it hardly has weight on it? If the panhard rods, were slightly out of adjustment would this cause issues?

It's pissing me off, so any one have any idea's whats causing this?

Cheers,

Monkey.

P.S. it has been like this pre-bent diff days. :roll:

Author:  FullyZooked [ Mon Sep 12, 2011 7:46 am ]
Post subject:  Re: Jimny lean??

Easy, don't jump jimnys and don't eat so many burgers ;)

Sorry mate that's all I got...I'm sure the sierra boys will jump in as they to can suffer from the dreaded sideways lean.

Author:  swifty_ano [ Mon Sep 12, 2011 7:47 am ]
Post subject:  Re: Jimny lean??

I would say dodgey springs. Possibly wrong rate on one?
Obviously you have checked that the drivers side spring and passenger side spring are right way around?

Author:  monley [ Mon Sep 12, 2011 7:50 am ]
Post subject:  Re: Jimny lean??

FullyZooked wrote:
Easy, don't jump jimnys and don't eat so many burgers ;)

Sorry mate that's all I got...I'm sure the sierra boys will jump in as they to can suffer from the dreaded sideways lean.


This was pre jumped days :lol: and I only weigh 70kg :roll:

Author:  monley [ Mon Sep 12, 2011 7:52 am ]
Post subject:  Re: Jimny lean??

swifty_ano wrote:
I would say dodgey springs. Possibly wrong rate on one?
Obviously you have checked that the drivers side spring and passenger side spring are right way around?


The springs are the right way round, I even tried different springs in the rear to see if it was the springs....it was not, it still leans over.

Author:  suzukiboy [ Mon Sep 12, 2011 7:55 am ]
Post subject:  Re: Jimny lean??

I had the same problem with my Vitara, so I added a spring spacer to just the rear drivers side.

Author:  Moag [ Mon Sep 12, 2011 9:00 am ]
Post subject:  Re: Jimny lean??

Hey Monkey,

Have you got your rear springs on the right side??
My 60mm TD were different lengths (about 15mm) and marked R for right and L for left from memory.

Jimny Shocks and Springs :P

Author:  monley [ Mon Sep 12, 2011 10:03 am ]
Post subject:  Re: Jimny lean??

Yep there are in the right way, long spring goes on the drivers side.

Author:  ando_zook94 [ Mon Sep 12, 2011 10:13 am ]
Post subject:  Re: Jimny lean??

Its called.. "Swagger"

Author:  alien [ Mon Sep 12, 2011 10:26 am ]
Post subject:  Re: Jimny lean??

ando_zook94 wrote:
Its called.. "Swagger"


rofl

Author:  sogone [ Mon Sep 12, 2011 10:30 am ]
Post subject:  Re: Jimny lean??

ando_zook94 wrote:
Its called.. "Swagger"


Bahahahahaha

Author:  monley [ Mon Sep 12, 2011 10:40 am ]
Post subject:  Re: Jimny lean??

I've got an idea to see if the lean is coming from the front or the back.

Author:  monley [ Wed Sep 14, 2011 9:14 am ]
Post subject:  Re: Jimny lean??

If i don;t have one pan hard rod centered right, could that cause some of the lean? The front springs are running on a bit of angle, so much of a angle the drivers side fowls on the chassis when flexing :lol:.

Author:  zooky08 [ Sat Dec 24, 2011 2:17 am ]
Post subject:  Re: Jimny lean??

Hey monkey do you still have your lean.
Mine is very noticeable. Everything seems to be fine, springs etc.
Mine only got the lean after I installed the arms which is quite weird.
I cannot figure it out, I have no idea what it could be.

Author:  monley [ Sat Dec 24, 2011 3:22 am ]
Post subject:  Re: Jimny lean??

Yep still got it :(

Close to 30mm on the drivers side, but it I put the drivers side td coil in with a stock front in the rear on the passenger side, the lean goes away :lol:

Author:  joel [ Sat Dec 24, 2011 3:27 am ]
Post subject:  Re: Jimny lean??

ive seen lots of jimnys lean.... some lean right onto there roof pretty often on this sight 8)

Author:  zooky08 [ Sat Dec 24, 2011 3:43 am ]
Post subject:  Re: Jimny lean??

monkey wrote:
Yep still got it :(

Close to 30mm on the drivers side, but it I put the drivers side td coil in with a stock front in the rear on the passenger side, the lean goes away :lol:
So yours is 30mm higher on drivers side?

Author:  monley [ Sat Dec 24, 2011 4:29 am ]
Post subject:  Re: Jimny lean??

30mm lower on drivers side...

Author:  zooky08 [ Sat Dec 24, 2011 4:58 am ]
Post subject:  Re: Jimny lean??

Same as mine. What I don't get is that it was perfect before the arms went in :?

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/