You need a set of poly bushes from Bruce!
on the body lift.
Not sure on suspension, everyone has different opinions
| auszookers.com https://auszookers.com/forum/ |
|
| Lift https://auszookers.com/forum/viewtopic.php?f=5&t=2574 |
Page 1 of 1 |
| Author: | Zook_Fan [ Wed Jul 23, 2008 1:05 am ] |
| Post subject: | Lift |
Ok so i am going to put 4" of lift on my sierra 2" ome springs all round and 2" body lift. What else needs to be upgraded other then the shocks? (not including the stuff that comes in the kits) getting the suspension from arb and body lift from just cruizin these the best places to go? |
|
| Author: | Scrawny [ Wed Jul 23, 2008 1:10 am ] |
| Post subject: | Re: Lift |
You need a set of poly bushes from Bruce! on the body lift.
Not sure on suspension, everyone has different opinions |
|
| Author: | just_cruizin [ Wed Jul 23, 2008 1:17 am ] |
| Post subject: | Re: Lift |
Longer brake hoses!! Not required for the BL but for the spring lift |
|
| Author: | Zook_Fan [ Wed Jul 23, 2008 1:34 am ] |
| Post subject: | Re: Lift |
nah arb are throwing the bushes in for free with the springs or i would get them from bruce (if the offer still stands by the time i get there) where do i get longer brake hoses? and would it be worth it getting longer shackles? im not sure about the shackles becasue then it isnt legal |
|
| Author: | Scrawny [ Wed Jul 23, 2008 1:37 am ] |
| Post subject: | Re: Lift |
Don't bother with shackles for now. Brake hoses can be made up by any brake shop for you. |
|
| Author: | Rockhopper [ Wed Jul 23, 2008 1:57 am ] |
| Post subject: | Re: Lift |
Pirtek or Enzed will make up brake hoses also |
|
| Author: | BlueSuzy [ Wed Jul 23, 2008 2:05 am ] |
| Post subject: | Re: Lift |
Some Enzeds... My Enzed dealer through my work wont touch them.. Extra insurance bills for brakelines to be made.Liability etc. |
|
| Author: | Zook_Fan [ Wed Jul 23, 2008 2:12 am ] |
| Post subject: | Re: Lift |
what sort of cost is involved in extended brake lines anyone done it? |
|
| Author: | _noddy [ Wed Jul 23, 2008 2:52 am ] |
| Post subject: | Re: Lift |
would stock hilux ones fit in to them |
|
| Author: | just_cruizin [ Wed Jul 23, 2008 2:59 am ] |
| Post subject: | Re: Lift |
Stock Hilux - not likely, different fittings. Any brake shop like ABS will make them for about $40 bucks each. Shackles aren't legal but then again most things aren't. |
|
| Author: | joeblow [ Wed Jul 23, 2008 3:26 am ] |
| Post subject: | Re: Lift |
use swift fronts....get rear made. never a good thing to use longer shackles...... |
|
| Author: | zooker [ Wed Jul 23, 2008 4:43 pm ] |
| Post subject: | Re: Lift |
I'd say it's never a good thing to use 2nd hand brake lines  For the sake of safety, $80 isn't unreasonable for a pair of new brake lines
|
|
| Author: | joeblow [ Wed Jul 23, 2008 5:16 pm ] |
| Post subject: | Re: Lift |
use swift ones as in order swift ones........ |
|
| Author: | Scrawny [ Wed Jul 23, 2008 6:02 pm ] |
| Post subject: | Re: Lift |
zooker wrote: I'd say it's never a good thing to use 2nd hand brake lines
Never use 2nd hand brake lines!! The cost of new ones is so minimal compared to the risks involved in 2nd hand ones. |
|
| Author: | steve [ Wed Jul 23, 2008 6:18 pm ] |
| Post subject: | Re: Lift |
gees, what ever happened to the good ol days of dodgy extended brake lines, extended shackles and welded steering components  
|
|
| Author: | Scrawny [ Wed Jul 23, 2008 6:33 pm ] |
| Post subject: | Re: Lift |
That only happens at your place Steve If it can't be fixed with a welder or grinder, it's not worth fixing.
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|