| auszookers.com https://auszookers.com/forum/ |
|
| vitara transfer in sierra https://auszookers.com/forum/viewtopic.php?f=5&t=25834 |
Page 1 of 1 |
| Author: | 89zook [ Thu Sep 15, 2011 11:11 am ] |
| Post subject: | vitara transfer in sierra |
I am wondering about running a vitara 1.6 gearbox and transfer in a sierra with hilux diffs i have been trying to search for info on it and all i can find is ppl running the 1.6 gearbox and motor but not the transfer so any info would be good thanks |
|
| Author: | shep [ Thu Sep 15, 2011 11:14 am ] |
| Post subject: | Re: vitara transfer in sierra |
it would put the tail shaft in the right spot for the diffs but gearing may be a issue. |
|
| Author: | 89zook [ Thu Sep 15, 2011 11:17 am ] |
| Post subject: | Re: vitara transfer in sierra |
That is the main reason i wanted to run it so that i can just use a hilux diff in the rear and not have to try and find a bundy one |
|
| Author: | Fatzook [ Thu Sep 15, 2011 11:18 am ] |
| Post subject: | Re: vitara transfer in sierra |
The biggest issue is the height of the rear output. Your shaft will be coming from up near the floor. Usually the body mount cross member will get in the way, so you will need to laminate that and then cut the centre section out so the drive shaft can pass through. If you have a LWB and cut the x-member as above, you will be laughing! Run 4.88 yota centres, and get some 4.24 transfer gears and you'll be set. |
|
| Author: | 89zook [ Thu Sep 15, 2011 11:24 am ] |
| Post subject: | Re: vitara transfer in sierra |
it will be going in a LWB it already has a 2'' body lift but the plans are for hilux diffs 4link rear 3link front and coilovers and maybe turbo |
|
| Author: | Fatzook [ Thu Sep 15, 2011 11:28 am ] |
| Post subject: | Re: vitara transfer in sierra |
89zook wrote: it will be going in a LWB it already has a 2'' body lift but the plans are for hilux diffs 4link rear 3link front and coilovers and maybe turbo
Should work then. And if you need more gearing than the transfer and diffs can offer. Buy an undertaker! |
|
| Author: | 89zook [ Thu Sep 15, 2011 11:33 am ] |
| Post subject: | Re: vitara transfer in sierra |
running hilux diffs it gives me lots of gearing options to play with |
|
| Author: | got_bar_work [ Thu Sep 15, 2011 8:10 pm ] |
| Post subject: | Re: vitara transfer in sierra |
Anything bigger then 31 buy a undertaker My mate runs 1.6 auto vit tc 5.29 hilux diffs and 36 in his Sierra and it sucks on road Don't think it's ever been in forth He's looking at the undertaker now |
|
| Author: | Fatzook [ Thu Sep 15, 2011 9:24 pm ] |
| Post subject: | Re: vitara transfer in sierra |
got_bar_work wrote: Anything bigger then 31 buy a undertaker
My mate runs 1.6 auto vit tc 5.29 hilux diffs and 36 in his Sierra and it sucks on road Don't think it's ever been in forth He's looking at the undertaker now That should not be driven on the road. 
|
|
| Author: | got_bar_work [ Thu Sep 15, 2011 9:34 pm ] |
| Post subject: | Re: vitara transfer in sierra |
He only got the 36 It was built and certified on 33 |
|
| Author: | oozuk [ Thu Sep 15, 2011 9:43 pm ] |
| Post subject: | Re: vitara transfer in sierra |
You also need to make slip yoke eliminators for the Vitara transfer case as they dont run output flanges, the tai shafts just slide in and out which is not suited for what your doing. |
|
| Author: | Fatzook [ Thu Sep 15, 2011 9:44 pm ] |
| Post subject: | Re: vitara transfer in sierra |
oozuk wrote: You also need to make slip yoke eliminators for the Vitara transfer case as they dont run output flanges, the tai shafts just slide in and out which is not suited for what your doing.
Nope. You just buy those from Lowrange 
|
|
| Author: | skyman [ Thu Sep 15, 2011 10:34 pm ] |
| Post subject: | Re: vitara transfer in sierra |
How about a kicker-3 / shogun box Vit to sierra case doubler. 1-1 in high, 3 gear ranges to choose from. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|