Fatzook wrote:
No.
bahahah 
yes im with Fatzook
| auszookers.com https://www.auszookers.com/forum/ |
|
| Mx5 engine into Sierra https://www.auszookers.com/forum/viewtopic.php?f=5&t=26188 |
Page 1 of 3 |
| Author: | 607CHA [ Tue Sep 27, 2011 6:23 am ] |
| Post subject: | Mx5 engine into Sierra |
Was thinking about the idea of putting the 1.8 ltr twin cam na8 engine and box int my zook. Has any one done this before. |
|
| Author: | Fatzook [ Tue Sep 27, 2011 6:23 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
No. |
|
| Author: | TryHard [ Tue Sep 27, 2011 6:24 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Fatzook wrote: No. bahahah
yes im with Fatzook
|
|
| Author: | royce [ Tue Sep 27, 2011 6:29 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Fatzook wrote: No.
Be fucked they havent, I know of one and I am sure there was even another on here at some point You obviously cant use the MX5 gearbox cause its a bit unusual but I remember being told combinations of other boxes and van bits gave you a really short manual box But its a lot of work for once again something that might not be useful |
|
| Author: | Fatzook [ Tue Sep 27, 2011 6:31 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
royce wrote: Fatzook wrote: No. Be fucked they havent, I know of one and I am sure there was even another on here at some point Hey I had a 50/50 chance of being right 
|
|
| Author: | 607CHA [ Tue Sep 27, 2011 6:47 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Just looking for another efi combination. |
|
| Author: | Fatzook [ Tue Sep 27, 2011 6:57 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
607CHA wrote: Just looking for another efi combination.
Are they cheap? |
|
| Author: | 607CHA [ Tue Sep 27, 2011 8:01 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
There's one on eBay with box for 400 |
|
| Author: | Fatzook [ Tue Sep 27, 2011 8:14 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
On paper, the Mazda 2 motor looks the goods! Max. Torque 135Nm @ 4000rpm Max. Power 76kW @ 6000rpm 1.5L EFI. Ofcoarse I have no idea if it could be made to work at a reasonable price or not.... |
|
| Author: | boostedbrick [ Tue Sep 27, 2011 8:17 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
If you wanted a mazda motor go for a BPT or something along those lines. The early B series 1.8 in the MX5 only put out 100kw.. A stock BPT is 132?kw and 230ft-lb's... 100kw is probably enough to smash your drivtrain anyway i guess.. |
|
| Author: | Fatzook [ Tue Sep 27, 2011 8:19 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Actually I just had a look at that mazda 1.8L, and it looks VERY compact. If you made an adapter to a vitara 5sp, it would be a very nice conversion.... |
|
| Author: | royce [ Tue Sep 27, 2011 8:30 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion....
Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! |
|
| Author: | Fatzook [ Tue Sep 27, 2011 8:35 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. 
|
|
| Author: | steak_knife [ Tue Sep 27, 2011 8:52 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Fatzook wrote: royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. & what eng did you just buy for your short term project camo???? 
|
|
| Author: | Fatzook [ Tue Sep 27, 2011 8:55 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
steak_knife wrote: Fatzook wrote: royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. & what eng did you just buy for your short term project camo???? One that I can't get from the suzuki line up. 
|
|
| Author: | steak_knife [ Tue Sep 27, 2011 8:58 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Fatzook wrote: steak_knife wrote: Fatzook wrote: royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. & what eng did you just buy for your short term project camo???? One that I can't get from the suzuki line up. H27 no good to ya??? 
|
|
| Author: | Fatzook [ Tue Sep 27, 2011 8:59 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
steak_knife wrote: Fatzook wrote: steak_knife wrote: Fatzook wrote: royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. & what eng did you just buy for your short term project camo???? One that I can't get from the suzuki line up. H27 no good to ya??? Not really. Its heavier than a 1Uzfe, and has half the power.
|
|
| Author: | royce [ Tue Sep 27, 2011 8:59 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
steak_knife wrote: Fatzook wrote: steak_knife wrote: Fatzook wrote: royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. & what eng did you just buy for your short term project camo???? One that I can't get from the suzuki line up. H27 no good to ya??? All statements are void once posted didn't you know |
|
| Author: | steak_knife [ Tue Sep 27, 2011 8:59 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Fatzook wrote: steak_knife wrote: Fatzook wrote: steak_knife wrote: Fatzook wrote: royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. & what eng did you just buy for your short term project camo???? One that I can't get from the suzuki line up. H27 no good to ya??? Not really. Its heavier than a 1Uzfe, and has half the power. But....... 
|
|
| Author: | steak_knife [ Tue Sep 27, 2011 9:00 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
royce wrote: steak_knife wrote: Fatzook wrote: steak_knife wrote: Fatzook wrote: royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. & what eng did you just buy for your short term project camo???? One that I can't get from the suzuki line up. H27 no good to ya??? All statements are void once posted didn't you know IMO!!!!!!
|
|
| Author: | Fatzook [ Tue Sep 27, 2011 9:04 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
steak_knife wrote: royce wrote: steak_knife wrote: Fatzook wrote: steak_knife wrote: Fatzook wrote: royce wrote: Fatzook wrote: If you made an adapter to a vitara 5sp, it would be a very nice conversion.... Piss off get seat mounts and idler brackets and sliders and shit sorted first!!!! I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. & what eng did you just buy for your short term project camo???? One that I can't get from the suzuki line up. H27 no good to ya??? All statements are void once posted didn't you know IMO!!!!!! Maybe I should fit 2x H27's
|
|
| Author: | steak_knife [ Tue Sep 27, 2011 9:15 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
| Twin turdbo for Twin stick's...
|
|
| Author: | boostedbrick [ Tue Sep 27, 2011 9:17 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Gonna need some power if you plan on sticking 200kg of motor and box in then.... 
|
|
| Author: | Fatzook [ Tue Sep 27, 2011 9:29 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
boostedbrick wrote: Gonna need some power if you plan on sticking 200kg of motor and box in then....
An SR20DET and box weighs 15kgs more than a 1UZ and box. Nobody hangs shit on that conversion
|
|
| Author: | steak_knife [ Tue Sep 27, 2011 9:33 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Fatzook wrote: An SR20DET and box weighs 15kgs more than a 1UZ and box. Nobody hangs shit on that conversion Not....Fatzook wrote: I'm a purist Royce. You won't find me fitting a BP to a sierra untill every last G16B is in a sierra. [/quote]
|
|
| Author: | Fatzook [ Tue Sep 27, 2011 9:42 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
steak_knife wrote: Fatzook wrote: An SR20DET and box weighs 15kgs more than a 1UZ and box. Nobody hangs shit on that conversion Not....toyota 1UZ-FE + R154 mission 486lbs + W58 mission 466lbs SR20DET Complete + Five Speed 490lbs (source Sport Compact Car)
|
|
| Author: | boostedbrick [ Tue Sep 27, 2011 9:44 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
1uz is basically a smaller package as well. Lots of win right there... |
|
| Author: | steak_knife [ Tue Sep 27, 2011 9:45 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Fatzook wrote: I'm a purist
|
|
| Author: | Fatzook [ Tue Sep 27, 2011 9:46 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
boostedbrick wrote: 1uz is basically a smaller package as well. Lots of win right there...
Yep. Short and compact. Things get tight near the chassis rails though, and that would ultimatelt limit how low it could be mounted, but I intend to push it a fair way back into the cab. |
|
| Author: | Built4thrashing [ Tue Sep 27, 2011 9:48 am ] |
| Post subject: | Re: Mx5 engine into Sierra |
Why not use a excel motor. cars can be bought for a few hundred and they are tuff little motors |
|
| Page 1 of 3 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|