| auszookers.com https://auszookers.com/forum/ |
|
| 3 inch suspension lift https://auszookers.com/forum/viewtopic.php?f=5&t=2622 |
Page 1 of 1 |
| Author: | wardy [ Thu Jul 31, 2008 12:02 am ] |
| Post subject: | 3 inch suspension lift |
Hi all iv sorced a 3 inch suspension lift for my suzuki vitara 91 jlx swb and im going to install it my self with a mechanic mate of mine. Just wondering if there is anything i should know before i start such as drive shaft spacers iv been informed i may need them? And is it a full weekend job or just a day job? and i know i seen on this site a thread with installation pics and write up but i cant seem to find it using the search function. cheers. |
|
| Author: | royce [ Thu Jul 31, 2008 12:10 am ] |
| Post subject: | Re: 3 inch suspension lift |
is it the calmini kit? easy way in the front is to pull the old springs and struts and arms out then fit the new arms, swing them down and put the springs in then bolt the struts to the hubs and slowly jack the arm up and put the strut top in, thats the easiest way I have found rear is pretty straight forward |
|
| Author: | wardy [ Thu Jul 31, 2008 1:28 am ] |
| Post subject: | Re: 3 inch suspension lift |
cheers thankx for that royce nah its a kit done by climax suspension in newcastle aparently they are a very nice kit. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|