sel la kidney.. your only gunna bruise them driving a zook anyway
| auszookers.com https://auszookers.com/forum/ |
|
| anyone wanna help a bruther out? https://auszookers.com/forum/viewtopic.php?f=5&t=2648 |
Page 1 of 1 |
| Author: | fat_tony [ Sun Aug 03, 2008 1:02 am ] |
| Post subject: | anyone wanna help a bruther out? |
if any one is interested, i am in need of a person capable and experienced person to do a vit engine conversion, iv been quoted 1 grand for the work, ill suplly all parts needed, but if anyone wants the work and can do it cheaper let me know.... |
|
| Author: | MART [ Sun Aug 03, 2008 2:07 am ] |
| Post subject: | Re: anyone wanna help a bruther out? |
Carby or EFI , I presume sierra , what model , Cheers Paul. |
|
| Author: | norm [ Sun Aug 03, 2008 12:57 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
hey paul, he will be putting the efi motor in, and yes it is a sierra, WT 93 model.. |
|
| Author: | fat_tony [ Sun Aug 03, 2008 2:50 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
92 model i think norm but same shit anyways |
|
| Author: | joeblow [ Sun Aug 03, 2008 6:45 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
a grand sounds good for an efi conversion. |
|
| Author: | badger [ Sun Aug 03, 2008 7:20 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
if someone quoted me that to do an efi swap n they werent a mate id steer clear. for that cheap they wont be doing a very nice job of it |
|
| Author: | fat_tony [ Sun Aug 03, 2008 10:57 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
nah hes a friend of a friend, done it a few times before, just shought i myt giive the auszookers a chance to make some green... its all good ill prolly just go with him thanx anyways guyz |
|
| Author: | lump_a_charcoal [ Mon Aug 04, 2008 1:15 am ] |
| Post subject: | Re: anyone wanna help a bruther out? |
Got the kit from NZ? someone here sells one, all bolt in, no cutting/modding required I think... |
|
| Author: | fat_tony [ Mon Aug 04, 2008 2:27 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
nah just gettin it all from a wrecker, and doin a whole engine swap |
|
| Author: | Pubic [ Mon Aug 04, 2008 3:32 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
http://www.outerlimits4x4.com/ftopic148038.php this is the adapter to use with your sierra 5 speed i think |
|
| Author: | lump_a_charcoal [ Mon Aug 04, 2008 3:39 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
Yeah that's the kit... |
|
| Author: | fat_tony [ Mon Aug 04, 2008 5:33 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
thanx guys, has any one on here used this adaptor before? from this guy, is he trust worthy? |
|
| Author: | steve [ Mon Aug 04, 2008 5:51 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
i haven't used a kit from that dude, but i have the same kit i bought from suzisport years ago, $200 is pretty good. |
|
| Author: | lump_a_charcoal [ Mon Aug 04, 2008 6:31 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
BenT is pretty big over on Outerlimits... PM him there... |
|
| Author: | joeblow [ Mon Aug 04, 2008 6:31 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
never been keen on those sorts of kits. when i do something like that i usually get my alloy dude to weld some new tags on the g/box so i know it 100%. BUT, i never recomend a sierra 5 speed behind a 1.6, mainly because it will chop out quickly. the solution is a vit 5 speed, much better and the only week link is the clutch. |
|
| Author: | Pubic [ Mon Aug 04, 2008 6:32 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
will the vit box fit easily enough in the tunnel and up to the transfer case? |
|
| Author: | norm [ Mon Aug 04, 2008 8:39 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
from what i knw it sits back a fair bit as i have one in mine |
|
| Author: | BlueSuzy [ Mon Aug 04, 2008 8:53 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
with the sierra 5sp i've had no problems afte 6mths of thrashing the snot outof it....With a locker and 33's. No weird noises, no extra backlash. everything A ok. I think you would be better off just buying the adaptor kit. Cheaper, Light, easy to work around. And if your scared, just take it easy. |
|
| Author: | joeblow [ Mon Aug 04, 2008 11:35 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
not saying don't buy it but wheigh up your options before doing a conversion of that kind. whenever i do a 1.6 conversion i will never warrant a sierra 5 speed behind it. shagged sierra 5 speeds i'v pulled out of cars-lost count. shagged vit 5 speed- none so far. with the vit 5 speed you get to use the vit flywheel which will give you a little more torque, but best of all you can choose from some nice vit clutches that are out there too. just consider all your options, if your going that far you might want to consider a few more bucks and chuck in better box. and sorry for going off topic a bit..... |
|
| Author: | fat_tony [ Tue Aug 05, 2008 1:17 am ] |
| Post subject: | Re: anyone wanna help a bruther out? |
nah its all good im glad u did go off topic its been very helpful, looks like i got some decisions to make, i myt go with the adaptor plate as its the cheaper option now, i spose if i chomp thru it, theres always the option to go for a vit box down the track anyways i guess right? |
|
| Author: | BlueSuzy [ Tue Aug 05, 2008 2:35 am ] |
| Post subject: | Re: anyone wanna help a bruther out? |
On a side note, I hope you realise you will need transfer gears for those tyres, Not just a motor for the stuff u may be doing...Ask norm.. |
|
| Author: | fat_tony [ Tue Aug 05, 2008 2:18 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
yeah i know, project for anotha day, 1 step at a time |
|
| Author: | Pubic [ Tue Aug 05, 2008 3:32 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
all blue is saying mate is that you need to plan ahead... might be an idea to start looking at getting some gears, other wise you may burn out your clutch and have to drop the whole box to do it all again... |
|
| Author: | fat_tony [ Tue Aug 05, 2008 6:09 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
yeah i get that, just not sure if the finances will stretch that far |
|
| Author: | Pubic [ Tue Aug 05, 2008 8:29 pm ] |
| Post subject: | Re: anyone wanna help a bruther out? |
sel la kidney.. your only gunna bruise them driving a zook anyway
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|