| Author |
Message |
jimny05
Joined: Fri Jan 21, 2011 3:22 am Posts: 31 Location: cornubia,4130
|
 Posted: Mon Oct 10, 2011 4:40 am |
|
|
Hi everyone,was looking at getting ARB airlocker for my 05 jimny until i found out the price($4,000 approx plus diff lapping if needed)front and rear anyway i was on jimnybits.co.uk and there are powertrax lockrite diff lockers on there.
Just wanting to find out if anyone has had these and if so how they found them on/off road
|
|
|
|
 |
zook91
Joined: Mon Aug 22, 2011 8:50 am Posts: 68 Location: Gold Coast
|
 Posted: Mon Oct 10, 2011 5:39 am |
|
|
i rang ARB on the gold coast and was qouted about $3900 fitted with the 2 air lockers and a compressor with the tire inflation kit
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Mon Oct 10, 2011 6:41 am |
|
Buy rear rd88 locker from lowrange $956
Buy front in aus $1195 I think
Compressor from lowrange $200 to $300
Pm oozuk on here to put them in $250-$300 per locker
Deal done 
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
zammit
Joined: Thu Nov 04, 2010 9:18 am Posts: 273 Location: traralgon
Vehicle: Jimny
|
 Posted: Mon Oct 10, 2011 7:53 am |
|
|
have ya looked into chinese lockers? as bad as they sound apparently there pretty good hahah
_________________ DONT BUY A GQ! zooks are better. i have both 
|
|
|
|
 |
jimny05
Joined: Fri Jan 21, 2011 3:22 am Posts: 31 Location: cornubia,4130
|
 Posted: Tue Oct 11, 2011 4:48 am |
|
|
That price was from ARB at coopers plains and they needed the car for 3 days unless they had to do diff lapping and that would go out to a week
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Tue Oct 11, 2011 4:57 am |
|
jimny05 wrote: That price was from ARB at coopers plains and they needed the car for 3 days unless they had to do diff lapping and that would go out to a week
Don't get ARB to do it...
Buy the lockers from the US and take them to your local diff shop or find someone who can fit them on here...
_________________ I want my old sig back 
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Tue Oct 11, 2011 4:59 am |
|
|
Wouldn't even take a day to do it
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
jimny05
Joined: Fri Jan 21, 2011 3:22 am Posts: 31 Location: cornubia,4130
|
 Posted: Tue Oct 11, 2011 5:04 am |
|
|
thanks guy's will try and pm oozuk to see if he can install them
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Tue Oct 11, 2011 5:10 am |
|
jimny05 wrote: thanks guy's will try and pm oozuk to see if he can install them
He's not far from you either. At Bethania from memory.
But he is working OS ATM, so you may have to wait a few weeks for him to get back.
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Tue Oct 11, 2011 9:00 am |
|
jimny05 wrote: That price was from ARB at coopers plains and they needed the car for 3 days unless they had to do diff lapping
Thats crap. If they said 'lapping' they are talking rubbish. No standard diff needs that, in fact, no after market diff should either.
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
Buddies72

az supporter
Joined: Wed Aug 25, 2010 9:14 am Posts: 240 Location: Brisbane
Vehicle: 96 LWB Vit
|
 Posted: Tue Oct 11, 2011 10:27 am |
|
jimny05 wrote: That price was from ARB at coopers plains and they needed the car for 3 days unless they had to do diff lapping and that would go out to a week
Go to another ARB store. I've only ever had over inflated prices from these guys.
_________________ Buddies
I can't leave well enough alone....
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Tue Oct 11, 2011 10:33 am |
|
|
Don't go to arb at all. I'm pretty sure any price you get told is to put just the locker in that doesn't include new bearing or any thing.
Joeblow or oozuke will confirm this
Oozuk will put in the new bearings and seal for the price I quoted above If u buy the bearings.
But like said u might have to wait till he comes back from OS
Or you can give it a go yourself, just have to get the pinion preload right
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
jimny05
Joined: Fri Jan 21, 2011 3:22 am Posts: 31 Location: cornubia,4130
|
 Posted: Wed Oct 12, 2011 5:10 pm |
|
|
contacted oozuk but he is unable to do side work anymore,Does anyone know of anyone near Brisbane that could install for me as i'm not able to fit myself or a good mechanic?
Just got a price from chinasoong for an air locker(RD88) for the rear,their price is $446usd including compressor,switch,wiring and other accessories. tempting to get one has anyone got one of these,if so what do you think of it
|
|
|
|
 |
squibby
Joined: Wed May 11, 2011 3:13 am Posts: 645 Location: Brisbane
Vehicle: On the lookout
|
 Posted: Wed Oct 12, 2011 9:56 pm |
|
jimny05 wrote: contacted oozuk but he is unable to do side work anymore,Does anyone know of anyone near Brisbane that could install for me as i'm not able to fit myself or a good mechanic? Just got a price from chinasoong for an air locker(RD88) for the rear,their price is $446usd including compressor,switch,wiring and other accessories. tempting to get one has anyone got one of these,if so what do you think of it
Plus $196 airfreight.
|
|
|
|
 |
Scales

az supporter
Joined: Mon May 30, 2011 9:28 am Posts: 2233 Location: Townsville
Vehicle: 03 Jim M13A no-vvt, Vinyl Spec
|
 Posted: Wed Oct 12, 2011 9:58 pm |
|
im thinking of getting the chinasoong one too. once i get the car going that is.... 
|
|
|
|
 |
jimny05
Joined: Fri Jan 21, 2011 3:22 am Posts: 31 Location: cornubia,4130
|
 Posted: Thu Oct 13, 2011 4:39 am |
|
|
chinasoong just got back to me about freight and it looks to be about $635usd to my door so as soon as i sort out the fitting it looks like i will order one
|
|
|
|
 |
krunchi
Joined: Sun Mar 27, 2011 7:46 am Posts: 108 Location: Brisbane
|
 Posted: Fri Oct 14, 2011 10:17 am |
|
|
Jimny05 PM me when you do maybe we can go halfs on shipping and save some money? I live in Oxley so not far form you.
|
|
|
|
 |
|