| auszookers.com https://auszookers.com/forum/ |
|
| do reduction gears affect 2H ? https://auszookers.com/forum/viewtopic.php?f=5&t=26712 |
Page 1 of 1 |
| Author: | also76 [ Thu Oct 13, 2011 4:41 am ] |
| Post subject: | do reduction gears affect 2H ? |
as stated above, was just wondering what sort of affect reduction gears have on 2H i have an 89 leafy running 30's and am thinking of reduction gears. either 4,9 or 6,5 |
|
| Author: | JrZook [ Thu Oct 13, 2011 4:42 am ] |
| Post subject: | Re: do reduction gears affect 2H ? |
also76 wrote: as stated above, was just wondering what sort of affect reduction gears have on 2H
i have an 89 leafy running 30's and am thinking of reduction gears. either 4,9 or 6,5 Dude have you even read the gear description on lowrange page? It tells you right there. |
|
| Author: | mnemonix [ Thu Oct 13, 2011 4:49 am ] |
| Post subject: | Re: do reduction gears affect 2H ? |
As above. http://www.lowrangeoffroad.com/index.ph ... -case.html Gear set comparison chart, right at the top. 16% or 20% high range reduction for the 2 ratios you've mentioned. |
|
| Author: | also76 [ Thu Oct 13, 2011 4:51 am ] |
| Post subject: | Re: do reduction gears affect 2H ? |
sweet, cant believe i didnt notice that ! haha sorry boys. anything else i should order with the gearset ? new bearings etc ? |
|
| Author: | Reubs [ Thu Oct 13, 2011 4:52 am ] |
| Post subject: | Re: do reduction gears affect 2H ? |
Read your last thread on this subject... http://www.auszookers.com/index.php?name=Forums&file=viewtopic&t=26686 Reubs wrote: also76 wrote: awesome, thanks for the help guys i guess gearing is the way to go. gearing wont affect the car while in 2H will it ? and will it still have enough go in 4H to smash the mud ruts ? In a 1.3 Sierra transfer, there will be a small reduction in high range. This will complement your 30" tyres and give you a lot more 'go' on-road. Smashing mud ruts is probably best done in low range - unless you like hitting your mud at 50km/h+. |
|
| Author: | Ben_Sierra [ Thu Oct 13, 2011 5:18 am ] |
| Post subject: | Re: do reduction gears affect 2H ? |
also76 wrote: sweet, cant believe i didnt notice that ! haha sorry boys.
anything else i should order with the gearset ? new bearings etc ? Get a full bearing kit, you don't want to have to pull the case apart again when a bearing shits itself... Better safe than sorry. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|