| auszookers.com https://auszookers.com/forum/ |
|
| Vitara tie rods https://auszookers.com/forum/viewtopic.php?f=5&t=26714 |
Page 1 of 1 |
| Author: | dave07 [ Thu Oct 13, 2011 6:35 am ] |
| Post subject: | Vitara tie rods |
I'm trying to replace my tie rod ends aswell as fix some toe in on my vitara the thing is the tie rod end I've managed to loosen the bolt but it won't budge. The second problem is the bolts to fix toe in/out I managed to loosen the bolt closest to the tie rod end but the next bolt is stuck on pretty well. Tried wd40 soaked it for a night, tried a bug hammer and spanner tried bigger hammer any ideas? |
|
| Author: | stocker [ Thu Oct 13, 2011 7:00 am ] |
| Post subject: | Re: Vitara tie rods |
Rost off Ice??? |
|
| Author: | FullyZooked [ Thu Oct 13, 2011 8:06 am ] |
| Post subject: | Re: Vitara tie rods |
stocker wrote: Rost off Ice???
+1. Next try some heat. |
|
| Author: | atari4x4 [ Thu Oct 13, 2011 8:29 am ] |
| Post subject: | Re: Vitara tie rods |
left & right hand threads on the adjusters. ball joint separator or 2 hammers should pop the tapered section from the drag link/kunckle. |
|
| Author: | shandy92 [ Thu Oct 13, 2011 12:28 pm ] |
| Post subject: | Re: Vitara tie rods |
you need to tighten the tie-rod before you can loosen it, seems to work for me. |
|
| Author: | dave07 [ Thu Oct 13, 2011 4:40 pm ] |
| Post subject: | Re: Vitara tie rods |
I've tried everything now haha tried heat cold might just cut the bolt off if I can't get it off tomorrow morning with one last try. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|