That sound's gahy'r than the Mardi Gras!!!
| auszookers.com https://auszookers.com/forum/ |
|
| Who to do conversion/what to salvage from Baleno? https://auszookers.com/forum/viewtopic.php?f=5&t=26729 |
Page 1 of 1 |
| Author: | DomGat [ Thu Oct 13, 2011 11:44 am ] |
| Post subject: | Who to do conversion/what to salvage from Baleno? |
Just bought a whole Baleno to do a motor conversion for a SJ80 Sierra. Is there anyone that is recommended to perform the conversion near Sydney? I don't have the time to do much of the work myself & need an idea of the right direction to go in. PM me if anyone can quote me the work. Is there is anything that would be worth retaining besides just the obvious stuff needed for the conversion. Wanted to achieve one of either air con/power steer/auto transmission at the same time. I know the air con, transmission & power steering from the Baleno isn't much use, (besides the compressor) but is there anything else worth keeping? Also, what might be easy to sell from the car before I dump the carcass at a wreckers? |
|
| Author: | Teracis [ Thu Oct 13, 2011 7:21 pm ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
I'm going to be doing this conversion soon and things I plan to keep for the sierra and or mates, that aren't going straight into the sierra with the engine are: Power steering pump A/C Pump A/C Condenser Thermo Fans Fuel Pump Wheels and Tyres (mate with hatchback) Now as for selling, I'm going to list it all over the place as wrecking and cheap parts and see what offers I get, mine's pretty straight bar the front left wishbone though so panels can be had. All of that is dependent on whether I think I'll make more back than just handing it off to a wrecker though. Oh and I'm going to have a look at whether I can use the Baleno Radiator in the sierra, even if I have to fab up some pipe or something, mainly because of the ease of mounting the baleno thermo fans on it. |
|
| Author: | want33s [ Thu Oct 13, 2011 9:06 pm ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
Baleno seats can be made to fit a Sierra fairly easily. Steering wheel also fits Sierra. Don't bother trying to wreck the remains out. Just take it to the wreckers or scrap yard and get whatever you can for it. |
|
| Author: | BlueSuzy [ Fri Oct 14, 2011 12:25 am ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
Baleno radiators are too big for sierra's, Even with the steering box on the other side of the chassis..(luxbox) |
|
| Author: | DomGat [ Fri Oct 14, 2011 12:28 am ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
Any idea which auto shop to get to perform the conversion? Been looking & can only find the one place. Or is there only the one place? |
|
| Author: | Ben_Sierra [ Fri Oct 14, 2011 12:30 am ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
Do it yourself, learn something about your car! |
|
| Author: | DomGat [ Fri Oct 14, 2011 12:37 am ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
Yeah I'm considering it, but I can see that it will probably lead to me hanging myself in my garage. I'd really like to- but lack the space (living in a unit block) & the time (would take me ages and leave me without the car for too long). |
|
| Author: | Teracis [ Sat Oct 15, 2011 12:00 am ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
BlueSuzy wrote: Baleno radiators are too big for sierra's, Even with the steering box on the other side of the chassis..(luxbox)
True, I haven't put a tape measure on it yet but from first look it seemed like it could be mounted right forward behind the grille and clear everything. I guess not though! I'll just get mine reco'd or a new 1.3 or 1.6 one then. |
|
| Author: | BlueSuzy [ Sat Oct 15, 2011 1:00 am ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
you could always do a jccccck, Use the headlights while your at it.. (don't do this) |
|
| Author: | DomGat [ Sat Oct 15, 2011 12:36 pm ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
So far from what I can gather almost nowhere performs motor conversions on Sierras in Sydney. At least not the whole job. Got a place that can mount the engine, but can't do the water plumbing or wiring. Perth or Brisbane, getting this done would be easy. |
|
| Author: | steak_knife [ Sat Oct 15, 2011 7:09 pm ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
That sound's gahy'r than the Mardi Gras!!!
|
|
| Author: | eldo [ Sat Oct 15, 2011 7:27 pm ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
of course there would be somewhere in sydney that does conversions, just go to any real performance shop and they will be more than happy to take your 5 grand for the job, mate do what you can yourself and then get a auto leccy to come and get it wired up and started, mount fuel pumps etc first |
|
| Author: | steak_knife [ Sat Oct 15, 2011 7:33 pm ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
I was going to say bring it to me, then noticed it's a coiler...
|
|
| Author: | russty_2008 [ Sat Oct 15, 2011 9:02 pm ] |
| Post subject: | Re: Who to do conversion/what to salvage from Baleno? |
Teracis wrote: BlueSuzy wrote: Baleno radiators are too big for sierra's, Even with the steering box on the other side of the chassis..(luxbox) True, I haven't put a tape measure on it yet but from first look it seemed like it could be mounted right forward behind the grille and clear everything. I guess not though! I'll just get mine reco'd or a new 1.3 or 1.6 one then. i used my baleno radiator in my conversion it was really easy to put in and it fit no worries |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|