auszookers.com
https://auszookers.com/forum/

Jimny manual hub rings
https://auszookers.com/forum/viewtopic.php?f=5&t=27071		 Page 1 of 1
Author:  zooky08 [ Mon Oct 24, 2011 7:17 am ]
Post subject:  Jimny manual hub rings
Can some one who has bought the manual hub rings of bigjimny.com, tell me the measures of the rings.
The outside nd inside diameter etc. And how thick

Thanks
Author:  89_tintop [ Mon Oct 24, 2011 8:05 am ]
Post subject:  Re: Jimny manual hub rings
You gettin some made?

If so would you be willing to make more?
Author:  zooky08 [ Mon Oct 24, 2011 8:10 am ]
Post subject:  Re: Jimny manual hub rings
I'm gonna try at work. I could get some but there out of stock nd need to fix the Jim.

If I get the measurements I can bore out the solid bar to the size and slice it into rings
Author:  89_tintop [ Mon Oct 24, 2011 8:14 am ]
Post subject:  Re: Jimny manual hub rings
let me know if you do.. Will be keen.
Author:  zooky08 [ Mon Oct 24, 2011 8:22 am ]
Post subject:  Re: Jimny manual hub rings
I'll see what I can do
Author:  monley [ Mon Oct 24, 2011 8:34 am ]
Post subject:  Re: Jimny manual hub rings
Can't you just buy AVM hubs of the self that fit with out mods? :?
Author:  zooky08 [ Mon Oct 24, 2011 8:46 am ]
Post subject:  Re: Jimny manual hub rings
Yes but I have 3sets off hubs sitting here nd like to do some thing with them.
Will be able to do the rings for 1/4 of the price of hubs
Author:  tonyevans [ Mon Oct 24, 2011 8:04 pm ]
Post subject:  Re: Jimny manual hub rings
You can get the inside and out side measurements of the hobs themselves and the thickness is the same as the flange on the hubs - Have a look at the fitting sheet and you will see what I mean

http://www.bigjimny.com/images/document ... l_hubs.pdf
Author:  zooky08 [ Mon Oct 24, 2011 10:55 pm ]
Post subject:  Re: Jimny manual hub rings
Thanks Tony I'll have a look
Author:  Fatzook [ Tue Oct 25, 2011 9:44 am ]
Post subject:  Re: Jimny manual hub rings
zooky08 wrote:
I'm gonna try at work. I could get some but there out of stock nd need to fix the Jim.

If I get the measurements I can bore out the solid bar to the size and slice it into rings


thats ALOT!!!! of work!!

Not to mention you will have to lap both surfaces once cut so that they are flat, otherwise you won't be able to make a seal.

FYI I have 20 set on order now. I've been working on a few projects in my AZ absence. Should be cheaper than bigjimny too.

But just incae you NEED to have a go yourself, they are 8mm thick.
Author:  zooky08 [ Tue Oct 25, 2011 10:27 am ]
Post subject:  Re: Jimny manual hub rings
Fatzook wrote:
zooky08 wrote:
I'm gonna try at work. I could get some but there out of stock nd need to fix the Jim.

If I get the measurements I can bore out the solid bar to the size and slice it into rings


thats ALOT!!!! of work!!

Not to mention you will have to lap both surfaces once cut so that they are flat, otherwise you won't be able to make a seal.

FYI I have 20 set on order now. I've been working on a few projects in my AZ absence. Should be cheaper than bigjimny too.

But just incae you NEED to have a go yourself, they are 8mm thick.
Yea I relies I will have to lap both side. Reason is that I need my Jim back on the road. It's been three weeks up on jack stand. Idk when bigjimny.com will have them back in stock.

You wouldn't have a estimate time you will have them ready to sell?
Author:  Fatzook [ Tue Oct 25, 2011 11:06 am ]
Post subject:  Re: Jimny manual hub rings
zooky08 wrote:
You wouldn't have a estimate time you will have them ready to sell?


Due date on the order is 14th of November. I really hope its sooner though, as I am waiting on a heap of other parts in that order for stock.
Author:  BertZook [ Tue Oct 25, 2011 8:16 pm ]
Post subject:  Re: Jimny manual hub rings
Fatzook wrote:
zooky08 wrote:
I'm gonna try at work. I could get some but there out of stock nd need to fix the Jim.

If I get the measurements I can bore out the solid bar to the size and slice it into rings


thats ALOT!!!! of work!!

Not to mention you will have to lap both surfaces once cut so that they are flat, otherwise you won't be able to make a seal.

FYI I have 20 set on order now. I've been working on a few projects in my AZ absence. Should be cheaper than bigjimny too.

But just incae you NEED to have a go yourself, they are 8mm thick.


yaaaaay some TSOR stuff for jimnys Armsup , finally some love from mr Fat


8O is this the end of the world??.. do Im gonna die or sumething?

haha

:P
Author:  mud_muncher [ Tue Oct 25, 2011 11:58 pm ]
Post subject:  Re: Jimny manual hub rings
I dont even run the spacers with Free-wheeling hubs. Just pull of your hubs remove the circlip and metal flange then grind that lip down. Vitara / Sierra hubs then just fit straight on.

I Busted 3 sets of hub bolts with the spaces on 34s but now they are shorter so less side loading on the bolts.
Author:  zooky08 [ Wed Oct 26, 2011 12:18 am ]
Post subject:  Re: Jimny manual hub rings
mud_muncher wrote:
I dont even run the spacers with Free-wheeling hubs. Just pull of your hubs remove the circlip and metal flange then grind that lip down. Vitara / Sierra hubs then just fit straight on.

I Busted 3 sets of hub bolts with the spaces on 34s but now they are shorter so less side loading on the bolts.
8O I do not want to touch my car with a grinder, I rather do it the right way. Also I will never be running 34s so I won't have that problem
Author:  tonyevans [ Wed Oct 26, 2011 12:21 am ]
Post subject:  Re: Jimny manual hub rings
zooky08 wrote:
mud_muncher wrote:
I dont even run the spacers with Free-wheeling hubs. Just pull of your hubs remove the circlip and metal flange then grind that lip down. Vitara / Sierra hubs then just fit straight on.

I Busted 3 sets of hub bolts with the spaces on 34s but now they are shorter so less side loading on the bolts.
8O I do not want to touch my car with a grinder, I rather do it the right way. Also I will never be running 34s so I won't have that problem


I think "The Right way" would be to use the hubs that were designed and built for the vehicle not some others that need adapters or modification.
Author:  zooky08 [ Wed Oct 26, 2011 1:06 am ]
Post subject:  Re: Jimny manual hub rings
tonyevans wrote:
zooky08 wrote:
mud_muncher wrote:
I dont even run the spacers with Free-wheeling hubs. Just pull of your hubs remove the circlip and metal flange then grind that lip down. Vitara / Sierra hubs then just fit straight on.

I Busted 3 sets of hub bolts with the spaces on 34s but now they are shorter so less side loading on the bolts.
8O I do not want to touch my car with a grinder, I rather do it the right way. Also I will never be running 34s so I won't have that problem


I think "The Right way" would be to use the hubs that were designed and built for the vehicle not some others that need adapters or modification.
That's true but I'm sick of the vacuum hubs stop working every time I go for wheel.
Author:  monley [ Wed Oct 26, 2011 2:50 am ]
Post subject:  Re: Jimny manual hub rings
Just buy avms....
Author:  zooky08 [ Wed Oct 26, 2011 3:09 am ]
Post subject:  Re: Jimny manual hub rings
monkey wrote:
Just buy avms....
Rings are cheaper haha
I found some scrap metal today. It's half done already Armsup
Author:  zooky08 [ Wed Oct 26, 2011 4:54 am ]
Post subject:  Re: Jimny manual hub rings
Does the inside diameter have to be the same as a Sierra hub or does it have to be the same diameter as the thing that sticks out of the Jimny spindle.
The scrap solid bar i found has been bored out to the same ID of a Sierra hub already
Author:  BenT [ Wed Oct 26, 2011 8:02 am ]
Post subject:  Re: Jimny manual hub rings
I have some Jimny hub spacers in stock. They come with cap screws, spring washers and new cone washers. $50 AU + $10 AU shipping.

Image


Ben
Author:  atari4x4 [ Wed Oct 26, 2011 8:04 am ]
Post subject:  Re: Jimny manual hub rings
nice work ben 8)
Author:  zooky08 [ Wed Oct 26, 2011 8:26 am ]
Post subject:  Re: Jimny manual hub rings
Ben you have a pm
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/