| Author |
Message |
607CHA

az supporter
Joined: Thu Apr 07, 2011 8:21 pm Posts: 265 Location: Baldhills
Vehicle: 02 jimny
|
 Posted: Thu Oct 27, 2011 6:51 am |
|
|
Need new rear shocks thinking of hilux rears or doetsch off low range. lengths must be 650mm- closed or 760+ open. advise or help please
_________________ LIVING LIFE ON THE EDGE, TILL YA ROLL
Last edited by 607CHA on Thu Oct 27, 2011 7:07 am, edited 1 time in total.
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Thu Oct 27, 2011 7:00 am |
|
|
Get the bilsteins. Cheap and good quality.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
607CHA

az supporter
Joined: Thu Apr 07, 2011 8:21 pm Posts: 265 Location: Baldhills
Vehicle: 02 jimny
|
 Posted: Thu Oct 27, 2011 7:11 am |
|
|
How much are the bilsteins? Does anyone know what shocks alien is running with his A frame rear
_________________ LIVING LIFE ON THE EDGE, TILL YA ROLL
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Thu Oct 27, 2011 7:16 am |
|
|
Have a look on lowrange??
Alien aframe rear??
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Thu Oct 27, 2011 7:20 am |
|
|
A frame or leaf, doesnt matter. flex it up and measure the length shock you need.
_________________ mlm
|
|
|
|
 |
607CHA

az supporter
Joined: Thu Apr 07, 2011 8:21 pm Posts: 265 Location: Baldhills
Vehicle: 02 jimny
|
 Posted: Thu Oct 27, 2011 8:20 am |
|
|
Using rear shock bar measurement are as above
_________________ LIVING LIFE ON THE EDGE, TILL YA ROLL
|
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Thu Oct 27, 2011 8:40 am |
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Thu Oct 27, 2011 8:49 am |
|
|
A frame rear is a 3link/4link coil setup.
Not shocks inverted/angled/more inboard at top mount.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
607CHA

az supporter
Joined: Thu Apr 07, 2011 8:21 pm Posts: 265 Location: Baldhills
Vehicle: 02 jimny
|
 Posted: Thu Oct 27, 2011 9:37 am |
|
|
Sorry for the confusion. I think the doetsch 3000 series dt3600 will be the route i choose. does anyone on az run these. if so what do you think of them
_________________ LIVING LIFE ON THE EDGE, TILL YA ROLL
|
|
|
|
 |
Red89
Joined: Tue Jan 12, 2010 10:30 pm Posts: 2801 Location: Perth
|
 Posted: Thu Oct 27, 2011 11:58 am |
|
|
I used to run the 3000's on the front and they were perfectly suited to my RUF setup and took a pounding.
|
|
|
|
 |
2stroker
Joined: Sun Sep 07, 2008 11:30 pm Posts: 2689 Location: North Brisbane
|
 Posted: Thu Oct 27, 2011 8:48 pm |
|
607CHA wrote: Need new rear shocks thinking of hilux rears or doetsch off low range. lengths must be 650mm- closed or 760+ open. advise or help please
Standard rear are 283mm compressed and 544mm extended.
I always remember these lengths because they numbers just happen to be the same as the small and big chev engine cubic inches.
|
|
|
|
 |
|