auszookers.com
https://auszookers.com/forum/

Engine Removal Drama
https://auszookers.com/forum/viewtopic.php?f=5&t=27150
Page 1 of 1

Author:  8ONES [ Wed Oct 26, 2011 10:52 pm ]
Post subject:  Engine Removal Drama

Hey all,

I'm trying to remove my engine at the moment and cannot remove the two upper trans/engine bolts. Lower two were easy to remove and yet the uppers I cannot even budge.

I have used releasing agent, hot water, hitting it on the end with a hammer so any other ideas or tips would be very much appreciated. I also had a mate help and between us had no success.

Regards,

Bones

Author:  christover1 [ Wed Oct 26, 2011 11:23 pm ]
Post subject:  Re: Engine Removal Drama

I'm in the middle of an engine transplant,
and one of my hard to reach bolts did same thing.
I tried all the same things.
In the end I went out and bought a cheap dremel copy,
rotary tool.
It has a long flixi extension,
and was perfect for cutting off the nut.
Damaged stud, too, but I used a bolt instead.
Good luck, it is a pain.

Author:  stockman [ Wed Oct 26, 2011 11:27 pm ]
Post subject:  Re: Engine Removal Drama

Take the box out with it, not much more effort.

Author:  boostedbrick [ Wed Oct 26, 2011 11:29 pm ]
Post subject:  Re: Engine Removal Drama

I ran abit of rope onto a spanner and out under the guard through the wheel arch. Helped get some more force onto the bolts.. But easy enough to just pull the whole lot at once..

Author:  8ONES [ Thu Oct 27, 2011 12:44 am ]
Post subject:  Re: Engine Removal Drama

Thanks all, will be attempting to take out the box as well. I will let you know how I fair.

Cheers,

Bones

Author:  foolsp33d [ Thu Oct 27, 2011 12:51 am ]
Post subject:  Re: Engine Removal Drama

stockman wrote:
Take the box out with it, not much more effort.


x2. easiest way to do it.. will make the reinstall ALOT easier as well..

Author:  Mistaria81 [ Thu Oct 27, 2011 1:22 am ]
Post subject:  Re: Engine Removal Drama

take both out, much easier to do and reinstall

Author:  SierraDan [ Thu Oct 27, 2011 1:36 am ]
Post subject:  Re: Engine Removal Drama

i took engine and box out, heaps easier.

Author:  mongrelzook [ Thu Oct 27, 2011 4:11 am ]
Post subject:  Re: Engine Removal Drama

I took head off then sat on block to get the top two bolts

Author:  stocker [ Thu Oct 27, 2011 4:31 am ]
Post subject:  Re: Engine Removal Drama

X10... Pull engine out with box :)

Author:  christover1 [ Thu Oct 27, 2011 4:34 am ]
Post subject:  Re: Engine Removal Drama

stocker wrote:
X10... Pull engine out with box :)


Now I pulled the Vit motor out,
it is clear pulling the lot out would be easier,

but in my case,
I don't have a roof thats high enough to allow that,
or a lifter capable of it.

Theres some shit hard bolts to undo,
my Sierra was easier but.

Author:  8ONES [ Thu Oct 27, 2011 8:18 pm ]
Post subject:  Re: Engine Removal Drama

Thanks everyone,

Took the two out together, was much easier. I was able to get one of the bolts out, however, the pass side had to be grinded off as it became very rounded.....

Pics for proof :) and as I said above thanks again!! Next step will be getting the new engine back and working out how to reverse the process!!!

Image

Cheers,

Bones

Author:  steak_knife [ Thu Oct 27, 2011 8:30 pm ]
Post subject:  Re: Engine Removal Drama

& for future reference, it's quicker to remove the whole front clip than just the grill... :helloo:

Give's more room to... :D

Author:  2stroker [ Thu Oct 27, 2011 8:40 pm ]
Post subject:  Re: Engine Removal Drama

And quicker still not to remove any of it just the radiator

Author:  steak_knife [ Thu Oct 27, 2011 8:44 pm ]
Post subject:  Re: Engine Removal Drama

2stroker wrote:
And quicker still not to remove any of it just the radiator


But look's like you know what your doing with the front clip off.... :roll:

:P

Author:  SierraDan [ Fri Oct 28, 2011 12:00 am ]
Post subject:  Re: Engine Removal Drama

2stroker wrote:
And quicker still not to remove any of it just the radiator

Thats what i did.

Author:  JrZook [ Fri Oct 28, 2011 12:30 am ]
Post subject:  Re: Engine Removal Drama

SierraDan wrote:
2stroker wrote:
And quicker still not to remove any of it just the radiator

Thats what i did.


Well done! Do you want a medal or something? :lol:

Author:  SierraDan [ Fri Oct 28, 2011 1:10 am ]
Post subject:  Re: Engine Removal Drama

JrZook wrote:
SierraDan wrote:
2stroker wrote:
And quicker still not to remove any of it just the radiator

Thats what i did.


Well done! Do you want a medal or something? :lol:

Yeah mate, i'll have one of yours. :roll:

Author:  sogone [ Fri Oct 28, 2011 1:11 am ]
Post subject:  Re: Engine Removal Drama

LOL^

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/