auszookers.com
https://auszookers.com/forum/

Timing TDC
https://auszookers.com/forum/viewtopic.php?f=5&t=27270		 Page 1 of 1
Author:  maloo11 [ Mon Oct 31, 2011 8:50 am ]
Post subject:  Timing TDC
When timing a g13b the manual says to get No4 on TDC. I thought all engines were timed on No1 TDC?
Author:  steak_knife [ Mon Oct 31, 2011 8:57 am ]
Post subject:  Re: Timing TDC
Some honda eng's run backwards.... :helloo:
Author:  losfer [ Mon Oct 31, 2011 9:11 am ]
Post subject:  Re: Timing TDC
when doing cam timing both #1 and #4 will be at top dead centre , but #1 will be on the exhaust stroke , and #4 will be at the finish of the compression stroke , ready for the power stroke.

if you set the timing marks up per the book , if you wind the crank one revolution this will now put #1 on the compression stroke/ combustion power stroke
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/