| auszookers.com https://auszookers.com/forum/ |
|
| 1998 coily timing belt marks not lining up. https://auszookers.com/forum/viewtopic.php?f=5&t=27303 |
Page 1 of 1 |
| Author: | kronix [ Tue Nov 01, 2011 6:25 am ] |
| Post subject: | 1998 coily timing belt marks not lining up. |
hey all, my 1998 coily water pump started leaking so i replaced it. before removing the timing belt i noticed that when the cam shaft timing mark lined up the crankshaft mark was out by one tooth to the clockwise direction. The engine seems to run fine and doesnt seem that gutless for a 1.3L but i havnt driven another one to tell. It has always used a bit of fuel since i bought it (200km) to a tank so maybe that has something to do with it aswell. has anyone eles come across this or has someone just put the timing belt on wrong?? Cheers Wade |
|
| Author: | want33s [ Tue Nov 01, 2011 6:41 am ] |
| Post subject: | Re: 1998 coily timing belt marks not lining up. |
Sounds like an incorrect fitment. Fit it so all the marks line up and see what happens. |
|
| Author: | kronix [ Tue Nov 01, 2011 6:59 am ] |
| Post subject: | Re: 1998 coily timing belt marks not lining up. |
yeah thats what i was thinking, when checking the ignition timing is there anything special you have to do on these engines? im new to the zook world. |
|
| Author: | want33s [ Tue Nov 01, 2011 8:24 am ] |
| Post subject: | Re: 1998 coily timing belt marks not lining up. |
As long as all the timing marks line up, you'll be right. Crank dot to top. Cam dot to top. |
|
| Author: | kronix [ Tue Nov 01, 2011 8:42 am ] |
| Post subject: | Re: 1998 coily timing belt marks not lining up. |
that bit i understand. Its checking the timing with a timing light do i have to pull any vacuum lines off or anything? and I think i read something about doing it on no4 lead? |
|
| Author: | FullyZooked [ Tue Nov 01, 2011 12:30 pm ] |
| Post subject: | Re: 1998 coily timing belt marks not lining up. |
Timing should be set to no.1 firing therefore you time off this. The only vac line to disconnect is the Vac advance on dizzy. |
|
| Author: | kronix [ Wed Nov 02, 2011 8:43 am ] |
| Post subject: | Re: 1998 coily timing belt marks not lining up. |
thanks mate, yeah it has a vac advance dizzy. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|