| auszookers.com https://auszookers.com/forum/ |
|
| engine over reving please help https://auszookers.com/forum/viewtopic.php?f=5&t=27327 |
Page 1 of 1 |
| Author: | BIGCAMMY [ Wed Nov 02, 2011 3:37 am ] |
| Post subject: | engine over reving please help |
ok l was driving down the street and decisided to give it a floggin and get to 100kmh in 10 seconds although at the next set of lights it was reving at 1600rpm. any idea y. as far as l can see nothing has fallen off or broken. |
|
| Author: | BIGCAMMY [ Wed Nov 02, 2011 3:40 am ] |
| Post subject: | Re: engine over reving please help |
its a vit with a 1.6 litre carburater |
|
| Author: | mongrelzook [ Wed Nov 02, 2011 3:46 am ] |
| Post subject: | Re: engine over reving please help |
Sticking butterfly. With it running gently put a screw driver down both troats to knock it back. Had this happen to an old Mazda. Secondary butterfly was jammed on metal framing in new carby. |
|
| Author: | BIGCAMMY [ Wed Nov 02, 2011 3:50 am ] |
| Post subject: | Re: engine over reving please help |
the automatic choke butterfly is open and the little round one that moves when u accerate is closed it only opens when l accerate. |
|
| Author: | skyman [ Wed Nov 02, 2011 7:53 am ] |
| Post subject: | Re: engine over reving please help |
Take some time and look for unhooked, cracked or dried up vacuum hoses, barring finding any of that replace your PCV valve. It sounds like a vacuum leak to me. |
|
| Author: | BIGCAMMY [ Wed Nov 02, 2011 10:46 pm ] |
| Post subject: | Re: engine over reving please help |
Thanks all for ur help there was a very small crack in one of the vaccum hoses and the spring on the accelerator peddle broke. Problem fixed all is well. |
|
| Author: | skyman [ Wed Nov 02, 2011 11:16 pm ] |
| Post subject: | Re: engine over reving please help |
Sweet as! armsup |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|