| auszookers.com https://auszookers.com/forum/ |
|
| bar notcher, which and where from? https://auszookers.com/forum/viewtopic.php?f=5&t=27463 |
Page 1 of 1 |
| Author: | Timbo_ [ Sun Nov 06, 2011 10:00 am ] |
| Post subject: | bar notcher, which and where from? |
Time to invest in a notcher. Seems to be alot of info on everything but notchers. Would like to know what people are using and where did they get it from. Looking to get something online because its usually cheaper than that of local equivalent up here in Darwin. Price is not an issue as it will be for future projects and have time to save. Any push in the right direction would be great 
|
|
| Author: | just_cruizin [ Sun Nov 06, 2011 10:30 am ] |
| Post subject: | Re: bar notcher, which and where from? |
There is a program you can get that tells you what angles to cut using a drop saw that means you don't need a notcher |
|
| Author: | rpmwrx [ Sun Nov 06, 2011 10:37 am ] |
| Post subject: | Re: bar notcher, which and where from? |
I would try OPW which sell JD Squared equipment. Heres the link... http://jd2.com.au/notchers/ |
|
| Author: | 11_evl [ Sun Nov 06, 2011 6:30 pm ] |
| Post subject: | Re: bar notcher, which and where from? |
i have used the speedworx one and OPW's JD2. both give great results but the jd is a much tighter feel, just feels more solid, rigid. http://www.speedwerx.com.au/products-de ... id=&pid=12 http://jd2.com.au/images/detailed/0/notchmaster-1.jpg |
|
| Author: | BlueSuzy [ Sun Nov 06, 2011 10:52 pm ] |
| Post subject: | Re: bar notcher, which and where from? |
If im at work, I cut them with a bandsaw 2 45'ish angle cuts and grind the inside a touch. If im at home, I cut the angles with a grinder.. |
|
| Author: | Timbo_ [ Mon Nov 07, 2011 3:11 am ] |
| Post subject: | Re: bar notcher, which and where from? |
i used to do the same with the grinder. Took far too long with just the rear bar. I plan to build a buggy completely from tube, so i need a notcher. Dropped jd squared an email regarding the 'notchmaster' one, hopefully they are reasonable on freight |
|
| Author: | sogone [ Mon Nov 07, 2011 3:14 am ] |
| Post subject: | Re: bar notcher, which and where from? |
I'll rent it of ya Timmy  . I to wish to build a buggy. Already have an r1 motor plus loom and ecu for the power.
|
|
| Author: | ball [ Mon Nov 07, 2011 3:21 am ] |
| Post subject: | Re: bar notcher, which and where from? |
I have this one, http://jd2.com.au/notchers/tn-100.html works really well on thin wall moly tube. |
|
| Author: | Timbo_ [ Tue Nov 08, 2011 12:24 am ] |
| Post subject: | Re: bar notcher, which and where from? |
thanks again for the help guys, still waiting for an email back but sounds like people are generally happy with JD squared gear. |
|
| Author: | tanshi [ Wed Sep 12, 2012 11:00 am ] |
| Post subject: | Re: bar notcher, which and where from? |
bit of a grave dig. obviously the JD2 stuff is great, but has anyone played with the cheeper ones? Im looking at this http://www.machineryhouse.com.au/P090 obviously its not going to be as good as the JD2, but for less than half the prices will it be good enough? Im only looking at 8-10 notches |
|
| Author: | KEENSY85 [ Wed Sep 12, 2012 11:13 pm ] |
| Post subject: | Re: bar notcher, which and where from? |
U could make one 
|
|
| Author: | DarkHorse [ Wed Sep 12, 2012 11:24 pm ] |
| Post subject: | Re: bar notcher, which and where from? |
These guys have some cool stuff: http://www.trick-tools.com/Tube_Notching_Endforming_145 Prices are good compared to local, but the only shipping quote I've got from them evened things out. Worth a look though. |
|
| Author: | KEENSY85 [ Thu Sep 13, 2012 4:23 am ] |
| Post subject: | Re: bar notcher, which and where from? |
I like just to buy the mourse taper shank and hole saw u could easly make the rest |
|
| Author: | tanshi [ Thu Sep 13, 2012 8:44 am ] |
| Post subject: | Re: bar notcher, which and where from? |
KEENSY85 wrote: U could make one by the time ive bought the parts i need for it and made one i may as well have bought a good one $$$ Vs time |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
