the ones in the back
| auszookers.com https://auszookers.com/forum/ |
|
| interior panels https://auszookers.com/forum/viewtopic.php?f=5&t=2756 |
Page 1 of 1 |
| Author: | Mike [ Wed Aug 13, 2008 10:45 pm ] |
| Post subject: | interior panels |
does anyone make or sell panels to replace the cardboard ones that go around the wheel arches in the back of a sierra aswell as the one that goes on the inside of the back door? Cheers |
|
| Author: | hooki [ Thu Aug 14, 2008 3:23 am ] |
| Post subject: | Re: interior panels |
i to am after the exact things......i'm keen as mustard to buy some. |
|
| Author: | lump_a_charcoal [ Thu Aug 14, 2008 2:24 pm ] |
| Post subject: | Re: interior panels |
I am in the process of getting some brushed alloy ones made up - once I do, I can post pics and a price if you like... |
|
| Author: | Damo [ Thu Aug 14, 2008 3:03 pm ] |
| Post subject: | Re: interior panels |
lump_a_charcoal wrote: I am in the process of getting some brushed alloy ones made up - once I do, I can post pics and a price if you like...
You got a template for them? |
|
| Author: | Brett [ Thu Aug 14, 2008 7:09 pm ] |
| Post subject: | Re: interior panels |
go buy some 3 or 4 mm hard bourd use for flooring and a jigsaw, it will take you about 20 min at the most. the hard bord is abot $6 a sheet for 122x122cm |
|
| Author: | Brett [ Thu Aug 14, 2008 7:09 pm ] |
| Post subject: | Re: interior panels |
go buy some 3 or 4 mm hard bourd use for flooring and a jigsaw, it will take you about 20 min at the most. the hard bord is abot $6 a sheet for 122x122cm |
|
| Author: | Mike [ Thu Aug 14, 2008 8:07 pm ] |
| Post subject: | Re: interior panels |
i tried making some from mdf and i can't use a jigsaw for shit i used the originals as templates and they don't fit properly and i would really like either alloy or plastic or something, anything but wood |
|
| Author: | _noddy [ Thu Aug 14, 2008 8:29 pm ] |
| Post subject: | Re: interior panels |
i made my ones |
|
| Author: | badger [ Thu Aug 14, 2008 9:58 pm ] |
| Post subject: | Re: interior panels |
there is a company in the us that sell plastic ones on ebay. there was a review on izook bout them |
|
| Author: | badger [ Thu Aug 14, 2008 9:58 pm ] |
| Post subject: | Re: interior panels |
there is a company in the us that sell plastic ones on ebay. there was a review on izook bout them |
|
| Author: | just_cruizin [ Thu Aug 14, 2008 10:55 pm ] |
| Post subject: | Re: interior panels |
_noddy wrote: i made my ones
Pic |
|
| Author: | _noddy [ Fri Aug 15, 2008 12:32 am ] |
| Post subject: | Re: interior panels |
the ones in the back
|
|
| Author: | Zook_Fan [ Fri Aug 15, 2008 9:20 pm ] |
| Post subject: | Re: interior panels |
dont look to bad at all |
|
| Author: | lump_a_charcoal [ Fri Aug 15, 2008 10:13 pm ] |
| Post subject: | Re: interior panels |
Damo wrote: lump_a_charcoal wrote: I am in the process of getting some brushed alloy ones made up - once I do, I can post pics and a price if you like... You got a template for them? Only my old panels... |
|
| Author: | Chinny [ Fri Aug 15, 2008 10:54 pm ] |
| Post subject: | Re: interior panels |
I'm in the process of cutting up some checker plate for the rear gate and rear wheel arches. Just cut up some 2mm alu for the front doors. pretty easy and will look sweet |
|
| Author: | bazook [ Sun Aug 17, 2008 1:15 am ] |
| Post subject: | Re: interior panels |
lowrange off road dell the plastic ones and cp one also |
|
| Author: | hooki [ Sun Aug 17, 2008 1:41 am ] |
| Post subject: | Re: interior panels |
do you know how much they sell the plastic one's for 'bazook'? |
|
| Author: | lump_a_charcoal [ Sun Aug 17, 2008 7:19 am ] |
| Post subject: | Re: interior panels |
Shipping will be a killer from the states... Someone here should organise a few to be done from a local plastics manufacturer... |
|
| Author: | Cozook [ Sat Sep 13, 2008 4:22 am ] |
| Post subject: | Re: interior panels |
G'day all! I made nice ones out of thick black plastic(similar to dash material) that i got from reverse garbage in marrickville sydney cost me 10 bucks plus a box of self tappers...took about 3-4 hours to get shmick..got no camera but if your in Sydney i can help ya make some....not hard,pretty strong and look factory!:) |
|
| Author: | lump_a_charcoal [ Sat Sep 13, 2008 3:03 pm ] |
| Post subject: | Re: interior panels |
Ah Reverse Garbage... I remember going there as a kid, awesome stuff. |
|
| Author: | mcwilly [ Mon Sep 29, 2008 10:33 am ] |
| Post subject: | Re: interior panels |
i just got my first zuk yesterday pick it up later this week. i reakon for the front doors and tailgate some carbon fibre sheet would look sweet as |
|
| Author: | Mike [ Mon Sep 29, 2008 5:50 pm ] |
| Post subject: | Re: interior panels |
yes that would look good but the panels would be worth more than a whole zook 
|
|
| Author: | jimbo_jones [ Tue Sep 30, 2008 1:42 am ] |
| Post subject: | Re: interior panels |
just make some up out of checker plate |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|