| auszookers.com https://auszookers.com/forum/ |
|
| Can new bearings be pressed off and rused? https://auszookers.com/forum/viewtopic.php?f=5&t=27692 |
Page 1 of 1 |
| Author: | shane1992 [ Tue Nov 15, 2011 6:20 am ] |
| Post subject: | Can new bearings be pressed off and rused? |
As the title states can new bearings be re pressed off an axle and pressed back on to be re used? I think my bearings are on back to front as my drum is making contact with the backing plate.. |
|
| Author: | DMAC [ Tue Nov 15, 2011 6:33 am ] |
| Post subject: | Re: Why am I having so much trouble with replacing back brea |
Have you replaced your wheel bearings at the same time? I had the same issue when I used NT wheel bearings on WT. 5mm difference. |
|
| Author: | shane1992 [ Tue Nov 15, 2011 6:47 am ] |
| Post subject: | Re: Why am I having so much trouble with replacing back breaks? |
Yes I replaced my wheel bearings... I hope that isnt my problem and I am going to be fuming if that is the case. I told them what blood make and modle my car is. |
|
| Author: | DMAC [ Tue Nov 15, 2011 7:58 am ] |
| Post subject: | Re: Why am I having so much trouble with replacing back breaks? |
shane1992 wrote: Yes I replaced my wheel bearings...
I hope that isnt my problem and I am going to be fuming if that is the case. I told them what blood make and modle my car is. Yep I told them the make and year too. 
My story. http://www.auszookers.com/index.php?nam ... ght=siezed |
|
| Author: | nato78 [ Tue Nov 15, 2011 8:16 am ] |
| Post subject: | Re: Why am I having so much trouble with replacing back breaks? |
I got the wrong size brake shoes, there were 2 different sizes in the WT's, the change over was about 93, but some of the later models still had the old size, must have been using up left over parts. Anyway, I've got a brand new set of shoes here to suit the later model drums if anyone wants em, they can have em for a long neck. |
|
| Author: | shane1992 [ Tue Nov 15, 2011 9:35 am ] |
| Post subject: | Re: Why am I having so much trouble with replacing back breaks? |
How will that stop my problem nato78? How much will a mechanic charge to do wheel bearings or just fix my problem? Can bearings be pressed off and reused again? I am seriously over it, its been 8 days going, something that should of took 1 day aswell |
|
| Author: | shane1992 [ Tue Nov 15, 2011 9:29 pm ] |
| Post subject: | Re: Can new bearings be pressed off and rused? |
New Questions, edit at the top! |
|
| Author: | DSzuke [ Tue Nov 15, 2011 10:18 pm ] |
| Post subject: | Re: Can new bearings be pressed off and rused? |
I'm not sure you'd be able to get the locking collar off the axle without grinding it off. If you can I can't see why you can't use the bearings as long as they aren't damaged in the removal process. |
|
| Author: | steak_knife [ Wed Nov 16, 2011 4:45 am ] |
| Post subject: | Re: Can new bearings be pressed off and rused? |
Not worth the hassle for the price of replacement.... Good lesson for ya mate.... 
|
|
| Author: | bazook [ Wed Nov 16, 2011 11:12 am ] |
| Post subject: | Re: Can new bearings be pressed off and rused? |
its ok ive done a mates axles thinking they were mine and left the backing plates off 
|
|
| Author: | nato78 [ Fri Nov 18, 2011 6:52 am ] |
| Post subject: | Re: Why am I having so much trouble with replacing back breaks? |
shane1992 wrote: How will that stop my problem nato78?
How much will a mechanic charge to do wheel bearings or just fix my problem? Can bearings be pressed off and reused again? I am seriously over it, its been 8 days going, something that should of took 1 day aswell Dunno why I wrote that there?? Must have been having a bit of a brain fart, sorry
|
|
| Author: | ajsr [ Fri Nov 18, 2011 7:08 am ] |
| Post subject: | Re: Why am I having so much trouble with replacing back breaks? |
shane1992 wrote: Yes I replaced my wheel bearings...
I hope that isnt my problem and I am going to be fuming if that is the case. I told them what blood make and modle my car is. yep but you would still be the dickhead that didn't put them side by side first and check before fitting 
|
|
| Author: | atari4x4 [ Fri Nov 18, 2011 7:09 am ] |
| Post subject: | Re: Why am I having so much trouble with replacing back breaks? |
nato78 wrote: shane1992 wrote: How will that stop my problem nato78? How much will a mechanic charge to do wheel bearings or just fix my problem? Can bearings be pressed off and reused again? I am seriously over it, its been 8 days going, something that should of took 1 day aswell Dunno why I wrote that there?? Must have been having a bit of a brain fart, sorry he changed the title of the thread after you posted that, it was originally about rear brake shoes. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|