auszookers.com
https://auszookers.com/forum/

Transfer case hitting floor...(jimny)
https://auszookers.com/forum/viewtopic.php?f=5&t=27896		 Page 1 of 1
Author:  monley [ Mon Nov 21, 2011 8:18 am ]
Post subject:  Transfer case hitting floor...(jimny)
:helloo: Gang,

I was under the jimny today just doing a spanner check after the weekend making sure nothing was broken or loose(I did have some other damage :( ), but anyway i did see that the transfer case mount on the passenger's side has been hitting the floor...it has left a big dent in the floor...but that's not the issue. The issue is how is the t-case mount hitting the floor? :?

All the bolt's are tight and there is no unusual free play that i can feel.....so how is the whole thing twisting over when under load if the bolt is tight and the rubber mount is still in tact? :? It's got me buggered how's it doing it.... :roll:

Cheers!
Author:  steak_knife [ Mon Nov 21, 2011 8:21 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
Remove mount's for a closer inspection.... :helloo:
Author:  atari4x4 [ Mon Nov 21, 2011 8:47 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
bent transfer mounts, didn't a jimny fella bend one in the dunes at stockton???
Author:  steak_knife [ Mon Nov 21, 2011 8:49 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
atari4x4 wrote:
bent transfer mounts, didn't a jimny fella bend one in the dunes at stockton???


Unless he's upgraded, they are aly, & just snap.... :crazy:
Author:  smiffkid [ Mon Nov 21, 2011 10:06 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
mine was doing the same thing so got stronger mounts
rubber will stretch a fair way when under a large amount of strain
Author:  monley [ Mon Nov 21, 2011 10:08 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
smiffkid wrote:
mine was doing the same thing so got stronger mounts
rubber will stretch a fair way when under a large amount of strain


How dose it move id the bolt is holding it tho? :?
Author:  smiffkid [ Mon Nov 21, 2011 10:30 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
na they bolt at each end not all the way through unless u mounts are different to wat mine where
Author:  shandy92 [ Mon Nov 21, 2011 12:36 pm ]
Post subject:  Re: Transfer case hitting floor...(jimny)
ur gears prob dont help with the additional torque!
Author:  jimny_timmy [ Tue Nov 22, 2011 5:15 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
atari4x4 wrote:
bent transfer mounts, didn't a jimny fella bend one in the dunes at stockton???
:helloo: That was me :D

No way of bending them like stekky said... Sure they aren't snapped mate?
Author:  zukenutter [ Tue Nov 22, 2011 6:49 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
Are the rubber bushes torn?
Author:  monley [ Tue Nov 22, 2011 7:24 am ]
Post subject:  Re: Transfer case hitting floor...(jimny)
Every thing is in tact....i think shnady92 hit the nail on the head.... :?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/