| auszookers.com https://auszookers.com/forum/ |
|
| How to remove the two prong black immobiliser? https://auszookers.com/forum/viewtopic.php?f=5&t=27927 |
Page 1 of 1 |
| Author: | ridzilla [ Tue Nov 22, 2011 4:26 am ] |
| Post subject: | How to remove the two prong black immobiliser? |
So basically as the title says, I'm trying to override/ remove the black immobiliser out of my Sierra! I'm sick of the fucking thing so any help as how to get rid of it will be greatly appriciated! |
|
| Author: | SSSIERA [ Tue Nov 22, 2011 4:55 am ] |
| Post subject: | Re: How to remove the two prong black immobiliser? |
you can by-pass it real easily. i have the same one! ill go have a look at how i can descirbe how to do it later, but with mine its a matter if unplugging two wires and joining them together! |
|
| Author: | ridzilla [ Tue Nov 22, 2011 5:05 am ] |
| Post subject: | Re: How to remove the two prong black immobiliser? |
Yeah I figured it out! All I did was open the motherboard, and connect the spade plugs to each other. but now I have another problem, when I turn the key the fan/ alternator only goes 5th of a turn then stops and makes a whining noise |
|
| Author: | stockman [ Tue Nov 22, 2011 5:33 am ] |
| Post subject: | Re: How to remove the two prong black immobiliser? |
Does the motor run? |
|
| Author: | ridzilla [ Tue Nov 22, 2011 5:41 am ] |
| Post subject: | Re: How to remove the two prong black immobiliser? |
Well it DID untill this popped up! She ran perfectly fine before it just stopped but it's slowly starting to crank for longer if I wait a while between cranks |
|
| Author: | atari4x4 [ Tue Nov 22, 2011 5:43 am ] |
| Post subject: | Re: How to remove the two prong black immobiliser? |
flat battery? |
|
| Author: | ridzilla [ Tue Nov 22, 2011 5:47 am ] |
| Post subject: | Re: How to remove the two prong black immobiliser? |
Yeah that's what I was thinking aye, got the charger on it now but last time I had a dead battery it didn't act like this but maybe it's because there's just 11 volts atm |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|