| auszookers.com https://auszookers.com/forum/ |
|
| Sump Clearance https://auszookers.com/forum/viewtopic.php?f=5&t=27968 |
Page 1 of 1 |
| Author: | suzukisport [ Wed Nov 23, 2011 6:28 am ] |
| Post subject: | Sump Clearance |
I'm going to be putting a G16B into my 1997 Sierra. Has a 2 inch body lift at the moment. I will be using the BenT adaptor kit. My question is will I need to modify the sump on the G16B at all for clearance? Cheers |
|
| Author: | Gwagensteve [ Wed Nov 23, 2011 6:31 am ] |
| Post subject: | Re: Sump Clearance |
That depends on axle position and bumpstop location. It's best to swap in the G13 Sump and oil pickup. Most likely the G16 sump will foul. Steve. |
|
| Author: | suzukisport [ Wed Nov 23, 2011 6:50 am ] |
| Post subject: | Re: Sump Clearance |
Stock bump stops. Are there many people who have put this motor into a coily? |
|
| Author: | Daves4wd [ Wed Nov 23, 2011 7:06 am ] |
| Post subject: | Re: Sump Clearance |
Talk to toobzook he's got on in his |
|
| Author: | 607CHA [ Wed Nov 23, 2011 7:11 am ] |
| Post subject: | Re: Sump Clearance |
On my leafy im still running 1.6 sump. been in 8months |
|
| Author: | stockman [ Wed Nov 23, 2011 7:16 am ] |
| Post subject: | Re: Sump Clearance |
It would also depend on the 16b motor. |
|
| Author: | BenT [ Wed Nov 23, 2011 7:42 am ] |
| Post subject: | Re: Sump Clearance |
suzukisport wrote: Stock bump stops. Are there many people who have put this motor into a coily?
Steve is correct, it is best to swap the sump with the 1300. It depends how much lift and how much bump-stop spacing you have done. The diff will touch the sump in a leafy when the suspension compresses to the stock bump-stops. It may be slightly different in a coily, but I doubt by much. I have installed a 1600 in a Coily with the stock 1600 sump, but it had 4 " of lift, and most importantly, 2" of bump-stop spacing. Ben |
|
| Author: | shep [ Wed Nov 23, 2011 7:48 am ] |
| Post subject: | Re: Sump Clearance |
i put a photo on here somewhere a few years ago of a 8v vitara motor in a leaf sierra. the diff was on the bumpstops(20mm extended) and there was at least 60mm vertical clearance and 25mm sideways clearance between the sump and diff. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|