What's the best way to adjust the front.
My front diff is sticking around and inch to the left.
Ive tried every thing. I can't seem to move the diff over at all
Need this done within 2 hrs. I'm not having much luck
Cheers
| auszookers.com https://auszookers.com/forum/ |
|
| Jimny adjustable panhard https://auszookers.com/forum/viewtopic.php?f=5&t=28037 |
Page 1 of 1 |
| Author: | zooky08 [ Fri Nov 25, 2011 7:45 pm ] |
| Post subject: | Jimny adjustable panhard |
What's the best way to adjust the front. My front diff is sticking around and inch to the left. Ive tried every thing. I can't seem to move the diff over at all Need this done within 2 hrs. I'm not having much luck
Cheers |
|
| Author: | 89_tintop [ Fri Nov 25, 2011 8:13 pm ] |
| Post subject: | Re: Jimny adjustable panhard |
what have you tried?? you wind it out to make it longer .. the diff moves across .. thats pretty much it. I'm not a fan of the toughdog ones, as they need to be removed at one end to be adjusted. its a pain in the arse.. |
|
| Author: | 45tr0 [ Fri Nov 25, 2011 8:50 pm ] |
| Post subject: | Re: Jimny adjustable panhard |
This is the jimnybit's one? Sit the car on its wheels. Loosen off the locking bolts, get a level or a fence paling or some other straight edge with a wide-ish base, and a tape measure. Place the level vertical against the wheel arch so it runs past the centre of the hub to the ground. Take a measurement of the gap between the hub and the level, then check the other side. Take the difference between the two measurements, Divide it by half. Then use a shifter to wind the adjuster out or in by this amount. Check your measurements again, if you're me you'll have gne too far and have to back a little off. Once you've got it right, lock it off with the locking nuts.. Be ready to check It again in a week or so once the suspension has settled. |
|
| Author: | zooky08 [ Fri Nov 25, 2011 8:59 pm ] |
| Post subject: | Re: Jimny adjustable panhard |
Yes it's the td ones, and has to be taking out one end to adjust it. Pain in the arse really. I got it pretty much good now. I just had to whine it in to the length needed and push the car till the bolt when it. I have the awaome wobbles now  Provs because I havnt done the castor corrected
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|