| auszookers.com https://auszookers.com/forum/ |
|
| who has put a 1ltr T/case in a coil sprung sierra?? https://auszookers.com/forum/viewtopic.php?f=5&t=2815 |
Page 1 of 1 |
| Author: | hooki [ Fri Aug 22, 2008 8:55 am ] |
| Post subject: | who has put a 1ltr T/case in a coil sprung sierra?? |
hey guys. I'm just after some info about fitting a 1ltr sierra transfer case into my coily. I'v been told that it's not as easy as putting one into a 1.3 leaf sprung sierra....so i'm just wondering what parts i will need to do the full install and how difficult it is?? Any info would be great. cheers. |
|
| Author: | hooki [ Tue Aug 26, 2008 7:13 am ] |
| Post subject: | Re: who has put a 1ltr T/case in a coil sprung sierra?? |
??? |
|
| Author: | mrw82 [ Tue Aug 26, 2008 8:43 pm ] |
| Post subject: | Re: who has put a 1ltr T/case in a coil sprung sierra?? |
if you get the brackets with the case it should fit up ok, flanges will need to be swapped so make sure the 1 litre case has the 4wd light switch as the earlier models aren't interchangeable. also I think the jackshaft is different or needs to be shortened, may be able to use 1.3 leafy shaft. dont treat this info as gospel, this is just what I have picked up from reading other info. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|