This would do the trick mate
http://www.auszookers.com/index.php?nam ... ic&t=27992
| auszookers.com https://auszookers.com/forum/ |
|
| Jimny AVM Manual Hubs https://auszookers.com/forum/viewtopic.php?f=5&t=28161 |
Page 1 of 1 |
| Author: | Total_Filth [ Wed Nov 30, 2011 2:32 am ] |
| Post subject: | Jimny AVM Manual Hubs |
Hey Guys, My auto hubs on my Suzie gave up the ghost half way up a hill..... Has anyone installed these AVM hubs from Jimny Bits? http://www.jimnybits.co.uk/shop/jimny/j ... od_33.html I know heaps of people do the sierra hubs mod, but I can't really be buggered doing that haha! Also to the fellas that have these... how much did they smack ya for postage? Cheers. TF |
|
| Author: | MacDaddy [ Wed Nov 30, 2011 2:51 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
Total_Filth wrote: Hey Guys,
My auto hubs on my Suzie gave up the ghost half way up a hill..... Has anyone installed these AVM hubs from Jimny Bits? http://www.jimnybits.co.uk/shop/jimny/j ... od_33.html I know heaps of people do the sierra hubs mod, but I can't really be buggered doing that haha! Also to the fellas that have these... how much did they smack ya for postage? Cheers. TF I had the AVM hubs on my GV, heard a bang when 4wheelin, got it looked at, and one hub was stuffed, so i got some 2nd hand, rebuilt, Aisin hubs fitted... no problems yet... http://www.aisinaftermarket.com/English ... el_Hub.php |
|
| Author: | Rusho [ Wed Nov 30, 2011 3:05 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
This would do the trick mate
http://www.auszookers.com/index.php?nam ... ic&t=27992 |
|
| Author: | zooky08 [ Wed Nov 30, 2011 3:56 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
BenT in the business section sells the rings I bought a kit, was about $60 I think. Much cheaper then new hubs, and very easy to install |
|
| Author: | Total_Filth [ Wed Nov 30, 2011 10:15 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
I really didn't wanna muck around with sierra hubs... But, just for the hell of it... Where's a good place to source them? TF |
|
| Author: | zooky08 [ Wed Nov 30, 2011 10:50 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
Total_Filth wrote: I really didn't wanna muck around with sierra hubs... Theres no big different between the avm hubs nd Sierra hubs. You are just puting a spacer ring between the hub nd spindle and putting the bolts in.
But, just for the hell of it... Where's a good place to source them? TF If you wanna buy the hubs it will save you 1min per hub of mucking around. Mine works perfectly fine so far. If you want the rings pm benT http://www.auszookers.com/index.php?nam ... rofile=625 |
|
| Author: | atari4x4 [ Wed Nov 30, 2011 11:01 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
plus the ability to find a spare pretty much anywhere.... the internal parts are shared with most japanese 4wds fitted with AISIN FWH's, where as with the AVM hubs are a bit of an oddball |
|
| Author: | Total_Filth [ Wed Nov 30, 2011 11:05 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
So is a second hand set of sierra hubs the go? Where is the best place to source them? TF |
|
| Author: | atari4x4 [ Wed Nov 30, 2011 11:08 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
PM want33s (sunshine coast sierra wreckers) or keep an eye out on the for sale section. |
|
| Author: | Total_Filth [ Wed Jan 04, 2012 5:18 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
Man who woulda thought it'd be so difficult to get the correct tool! I've looked everywhere for a T10 E-Torx Socket.... and NO one stocks them. I can buy a pack of 10 from Bunnings, but really don't wanna do that. I've tried, repco, autopro, supercheap, bunnings and total tools.... no luck. Any suggestions? TF |
|
| Author: | zooky08 [ Wed Jan 04, 2012 5:29 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
Got a set of kinchrome ones from auto barn. Were between $10 to $20 |
|
| Author: | MacDaddy [ Wed Jan 04, 2012 5:37 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
AutoOne also have a good range of Kingchrome gear as well... 
|
|
| Author: | Scales [ Wed Jan 04, 2012 7:33 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
i got my e10 from ebay US. was like 2 bucks. SCORE lives in my tool roll in the car now. Also Jimny bits is reliable as anything, as for postage, you put the item in the cart and put australia and it will tell you. from memory i checked about a week ago and it was around 260 or something delivered. Im getting some sierra hubs from fatzook.... |
|
| Author: | lordviper556 [ Wed Jan 04, 2012 7:38 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
i got a set of sierra hubs from a local wrecker and got the spacers made up by an engineering shop, $30ish from memory. i have had no problems with them and its a piss easy conversion. dont forget you will need new bolts as the jimny ones are to short, they need to be about 15mm longer. as for the socket my mechanic lent me one and i then went out and got a cheap set from autoone about a week later, never used it tho lol. |
|
| Author: | zooky08 [ Wed Jan 04, 2012 8:21 am ] |
| Post subject: | Re: Jimny AVM Manual Hubs |
I got my rings from benT comes with new bolts, also fatzook sells them aswell I think? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|