auszookers.com
https://auszookers.com/forum/

Is my air locker buggered?
https://auszookers.com/forum/viewtopic.php?f=5&t=28422
Page 1 of 1

Author:  Damo [ Wed Dec 07, 2011 7:26 pm ]
Post subject:  Is my air locker buggered?

Image

Front diff got a little hot due to running with no oil :oops: and when I had the centre open last night I noticed the plastic cage that pushes the locking ring in place is melted in a few spots. It still actuates OK when I tested it with shop air so I thought it will be OK to run.

Author:  joeblow [ Wed Dec 07, 2011 7:34 pm ]
Post subject:  Re: Is my ait locker buggered?

Just replace the plastic piston. They are cheap enough.

Author:  tanshi [ Wed Dec 07, 2011 9:19 pm ]
Post subject:  Re: Is my ait locker buggered?

only cost me $15 bucks last time i had to replace one damo

Author:  tanshi [ Wed Dec 07, 2011 9:20 pm ]
Post subject:  Re: Is my ait locker buggered?

probably replace all o rings and rubber seals while your at it.

Author:  Damo [ Wed Dec 07, 2011 9:45 pm ]
Post subject:  Re: Is my ait locker buggered?

tanshi wrote:
probably replace all o rings and rubber seals while your at it.


I have new orings but the uring is like $100, might give that a miss

Author:  tanshi [ Wed Dec 07, 2011 9:46 pm ]
Post subject:  Re: Is my ait locker buggered?

wow, ok, wasnt that much when i last bought one.

Author:  atari4x4 [ Wed Dec 07, 2011 10:55 pm ]
Post subject:  Re: Is my ait locker buggered?

when the plastic junk broke in my RD88 this is what was replaced when ARB rebuilt it.

Quad Ring, XR133V75 x 2
part number 160235

Locking Tab 6mm x8
part number 150402

U Ring - RD 75/87/88/118 x 1
part number 160306

Piston, G Type x1
part number 040201

Author:  Damo [ Wed Dec 07, 2011 11:13 pm ]
Post subject:  Re: Is my ait locker buggered?

atari4x4 wrote:
when the plastic junk broke in my RD88 this is what was replaced when ARB rebuilt it.

Quad Ring, XR133V75 x 2
part number 160235

Locking Tab 6mm x8
part number 150402

U Ring - RD 75/87/88/118 x 1
part number 160306

Piston, G Type x1
part number 040201


Urings are $50.58 ea, the piston is $10.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/