| auszookers.com https://auszookers.com/forum/ |
|
| 1.0L transfer (non switch type) gears into a W/T transfer... https://auszookers.com/forum/viewtopic.php?f=5&t=28559 |
Page 1 of 1 |
| Author: | suzooky87 [ Mon Dec 12, 2011 8:50 am ] |
| Post subject: | 1.0L transfer (non switch type) gears into a W/T transfer... |
Does anyone know weather the gears from a 1.0L transfer (non switch type) fit into a W/T transfer case???? |
|
| Author: | 89_tintop [ Mon Dec 12, 2011 8:51 am ] |
| Post subject: | Re: 1.0L transfer (non switch type) gears into a W/T transfer... |
No...they dont |
|
| Author: | mrw82 [ Mon Dec 12, 2011 8:54 am ] |
| Post subject: | Re: 1.0L transfer (non switch type) gears into a W/T transfer... |
but you can fit the whole 1.0L non switched transfer case into a WT sierra, just need to gin around with uni joints/flange yokes. |
|
| Author: | suzooky87 [ Mon Dec 12, 2011 9:00 am ] |
| Post subject: | Re: 1.0L transfer (non switch type) gears into a W/T transfer... |
could i use the gears from both to make a rocklobster? |
|
| Author: | SierraDan [ Mon Dec 12, 2011 9:07 am ] |
| Post subject: | Re: 1.0L transfer (non switch type) gears into a W/T transfer... |
with gears available so easily these days its not work making the rocklobsters anymore. |
|
| Author: | suzooky87 [ Mon Dec 12, 2011 10:03 am ] |
| Post subject: | Re: 1.0L transfer (non switch type) gears into a W/T transfer... |
thats what i was thinking.................. i just have a 1l non switch case here and i want to use it for something. |
|
| Author: | Zook_Fan [ Mon Dec 12, 2011 10:05 am ] |
| Post subject: | Re: 1.0L transfer (non switch type) gears into a W/T transfer... |
And no you can't anyway. The gears are set at a different spacing apart from each other in the case and it doesn't work with 1.3 spacing. |
|
| Author: | suzooky87 [ Mon Dec 12, 2011 10:14 am ] |
| Post subject: | Re: 1.0L transfer (non switch type) gears into a W/T transfer... |
just dont know what to do with the thing...................... |
|
| Author: | Zook_Fan [ Tue Dec 13, 2011 8:25 am ] |
| Post subject: | Re: 1.0L transfer (non switch type) gears into a W/T transfer... |
Sell it or put it in as is with different yokes |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|