| auszookers.com https://auszookers.com/forum/ |
|
| vitara drum brakes/ axle removal https://auszookers.com/forum/viewtopic.php?f=5&t=28678 |
Page 1 of 1 |
| Author: | swifty_ano [ Fri Dec 16, 2011 7:44 am ] |
| Post subject: | vitara drum brakes/ axle removal |
Ok first off I have searched. All the other threads are different to my car. With my vitara my rear brake set up is blocked by my hub. By the looks of it I cannot get in to change anything without removing my axle. Is this right or am I not seeing the simple way? Basically my car has a drum cover that falls off when the wheel is taken off. Then my hub with 5 studs in it (obviously). Where everyone else's seem to have a small hub with 4 bolts in it. Does anyone have pictures of my set up because I have no idea how it goes together. Next question is, how do I remove the axle? I have tried turning the drum inside out and using it as a slide hammer but it doesn't work. Any little tricks you can help me with? |
|
| Author: | royce [ Fri Dec 16, 2011 7:46 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
dont remove teh axle, you jsut need to harden up and get at it its hard work but its how it is, PS when you remove the axle the brakes come with it |
|
| Author: | swifty_ano [ Fri Dec 16, 2011 7:53 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
royce wrote: dont remove teh axle, you jsut need to harden up and get at it
its hard work but its how it is, PS when you remove the axle the brakes come with it Haha I'm way too soft. I have to do wheel cylinders aswell. So its gonna be near impossible. Or so it seems. Royce, have you seen the set up I'm talking about? (No sarcasm intended) |
|
| Author: | atari4x4 [ Fri Dec 16, 2011 7:55 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
sounds like the same set up as mine, what are you trying to do? have you removed the 4 nuts from the bearing retainer on the other side of the brake backing plates? you can change the brake shoes with the axle in place. |
|
| Author: | royce [ Fri Dec 16, 2011 7:55 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
umm we own the same model car, of course I have most normal cars are similar, pull the shoe retaining pins first and jsut work at it one side at a time |
|
| Author: | swifty_ano [ Fri Dec 16, 2011 8:02 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
atari4x4 wrote: sounds like the same set up as mine, what are you trying to do?
have you removed the 4 nuts from the bearing retainer on the other side of the brake backing plates? you can change the brake shoes with the axle in place. Yep took the nuts off and it still wont budge. I need to do wheel cylinders at the same time. Is this possible? |
|
| Author: | Scrawny [ Fri Dec 16, 2011 8:02 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
They're fiddly and time consuming and a general pita!! |
|
| Author: | swifty_ano [ Fri Dec 16, 2011 8:03 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
royce wrote: umm we own the same model car, of course I have
most normal cars are similar, pull the shoe retaining pins first and jsut work at it one side at a time That's right. Forgot about that. Got a spare CV |
|
| Author: | swifty_ano [ Fri Dec 16, 2011 8:19 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
Scrawn wrote: They're fiddly and time consuming and a general pita!!
I made the royal mistake of having the handbrake on when I took the drum off. Now all the springs have fallen off and I have no idea where they go. Even more of a pita |
|
| Author: | Scrawny [ Fri Dec 16, 2011 8:21 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
Both sides? |
|
| Author: | swifty_ano [ Fri Dec 16, 2011 8:28 am ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
Just one side. I'll have to find a way to jack up the other side to have a look |
|
| Author: | swifty_ano [ Fri Dec 16, 2011 11:06 pm ] |
| Post subject: | Re: vitara drum brakes/ axle removal |
Who would of thought it would he so hard to find brake shoes. I have the awkward model that no one had heard of |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|