| auszookers.com https://auszookers.com/forum/ |
|
| standard rims https://auszookers.com/forum/viewtopic.php?f=5&t=287 |
Page 1 of 1 |
| Author: | trueblue [ Sun Aug 20, 2006 11:53 pm ] |
| Post subject: | standard rims |
Apart from suzuki & rocky rims, what other standard size rims will fit a zook I've heard that Lada rims also fit |
|
| Author: | dj181 [ Mon Aug 21, 2006 12:03 am ] |
| Post subject: | Re: standard rims |
lada rims do fir but i am pretty sure that the offest is way out...i think they sit way too far in from memory |
|
| Author: | antt [ Mon Aug 21, 2006 1:39 pm ] |
| Post subject: | Re: standard rims |
f100 rims, also jeep rims |
|
| Author: | munga [ Mon Aug 21, 2006 3:33 pm ] |
| Post subject: | Re: standard rims |
early cj jeep rims. i dont think the wrangler / cherokee rims fit do they antt? |
|
| Author: | steve [ Mon Aug 21, 2006 3:40 pm ] |
| Post subject: | Re: standard rims |
antt wrote: f100 rims, also jeep rims
4wd F100 rims only. The 2wd F100 rims don't i think, because the center hole isn't large enough to go over the hubs. |
|
| Author: | Nev08 [ Mon Aug 21, 2006 10:40 pm ] |
| Post subject: | Re: standard rims |
yeh only the early jeeps not wranglers and cherokees, early F100, lada, kia i believe for the alloys and rocky. thats bout it i think |
|
| Author: | trueblue [ Tue Aug 22, 2006 1:31 am ] |
| Post subject: | Re: standard rims |
Thanks guys, Just getting some options for the zook. Being a dirty penny pinching marridy |
|
| Author: | munga [ Tue Aug 22, 2006 2:43 pm ] |
| Post subject: | Re: standard rims |
wossa marridy? |
|
| Author: | dj181 [ Tue Aug 22, 2006 8:12 pm ] |
| Post subject: | Re: standard rims |
a married person!! |
|
| Author: | Westie [ Fri Sep 08, 2006 1:45 pm ] |
| Post subject: | Re: standard rims |
munga wrote: early cj jeep rims. i dont think the wrangler / cherokee rims fit do they antt?
Jeep Pre 1993 (CJ) have the 5X5.5 Pattern |
|
| Author: | mandy [ Sat Sep 09, 2006 3:00 pm ] |
| Post subject: | Re: standard rims |
I used to have Lada rims on Grumpy. I'm not sure on what widths are available in them but i know mine were very narrow and 16's, they were also cut and flipped. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|