31zook wrote:
i think that fatzook (TSOR) and oozuk can make plug and play looms also.... would be worth checking out
+ wiring
| auszookers.com https://auszookers.com/forum/ |
|
| G16a vs G16b engines https://auszookers.com/forum/viewtopic.php?f=5&t=28781 |
Page 1 of 1 |
| Author: | graz82 [ Mon Dec 19, 2011 8:37 am ] |
| Post subject: | G16a vs G16b engines |
Looking at doing a conversion soon into my sierra, how great are the real word power differences with thesr motors? Im leaning toward the carby g16a because it seems a simple swap, or id the efi thing a bit more simple than it looks? Im more curious about power delivery while driving mainly, tyre sizes etc Can i still fun my 1.3 inlet manifold and carby on the g16a or should i leave the factory stuff on it? Any info/tips would be great Cheers |
|
| Author: | Chop [ Mon Dec 19, 2011 9:00 am ] |
| Post subject: | Re: G16a vs G16b engines |
There is a big difference to these motors, the responsiveness of the g16b is a cut above the g16a. I put a g16a in my sierra and it was good improvement over the 1.3, but when i bought a lwb g16b vitara with double the kilometres the g16a had it still shit all over the g16a. And the lwb was heavier aswell. If i was in the position to be doing a conversion again, a g16b would be done without hesitation. The g16a is an easier swap, but for a bit more work i think g16b pays for itself easily. |
|
| Author: | Gwagensteve [ Mon Dec 19, 2011 9:11 am ] |
| Post subject: | Re: G16a vs G16b engines |
IMHO don't bother with the A. You'll still wish you had injection- cut out the middleman and go straight for the B. Steve |
|
| Author: | graz82 [ Mon Dec 19, 2011 9:31 am ] |
| Post subject: | Re: G16a vs G16b engines |
Yeah im just worried about all the efi wiring etc i would need a good auto sparky i assume This motor is still in the car so it would make sense to get the whole wiring loom? Any other important bits i should grab while im at it? |
|
| Author: | alien [ Mon Dec 19, 2011 9:50 am ] |
| Post subject: | Re: G16a vs G16b engines |
go the 'B' - even if you need to have the loom made by an auto electrician, its worth the extra cost. |
|
| Author: | atari4x4 [ Mon Dec 19, 2011 10:06 am ] |
| Post subject: | Re: G16a vs G16b engines |
send you loom to this bloke for a change over plug & play loom http://www.facebook.com/pages/Killa-Kus ... 1769825285 Email killa_kustoms@live.com.au Phone 0404811498 |
|
| Author: | graz82 [ Mon Dec 19, 2011 10:37 am ] |
| Post subject: | Re: G16a vs G16b engines |
Cheers for that link, will be helpful |
|
| Author: | bristlenose2008 [ Mon Dec 19, 2011 7:15 pm ] |
| Post subject: | Re: G16a vs G16b engines |
Don't just go any B . Consider going for the crank fire B out of the last G16B version. That way you can say goodbye to the dizzy and also as far as I know the computer that came with those can are Flashable. When you go from carb to EFI you may as well try get this motor and you don't even need to consider rebuilding those as they are pretty young engines. Looking back now, for me it would have been thousands cheaper going this way. |
|
| Author: | 31zook [ Mon Dec 19, 2011 7:19 pm ] |
| Post subject: | Re: G16a vs G16b engines |
i think that fatzook (TSOR) and oozuk can make plug and play looms also.... would be worth checking out |
|
| Author: | JrZook [ Mon Dec 19, 2011 10:57 pm ] |
| Post subject: | Re: G16a vs G16b engines |
31zook wrote: i think that fatzook (TSOR) and oozuk can make plug and play looms also.... would be worth checking out
+ wiring
|
|
| Author: | steak_knife [ Tue Dec 20, 2011 7:56 am ] |
| Post subject: | Re: G16a vs G16b engines |
Gwagensteve wrote: IMHO don't bother with the A. You'll still wish you had injection- cut out the middleman and go straight for the B.
Steve X 6037758287256456758348365 
|
|
| Author: | steak_knife [ Tue Dec 20, 2011 7:56 am ] |
| Post subject: | Re: G16a vs G16b engines |
JrZook wrote: 31zook wrote: i think that fatzook (TSOR) and oozuk can make plug and play looms also.... would be worth checking out + wiring
|
|
| Author: | 31zook [ Tue Dec 20, 2011 5:06 pm ] |
| Post subject: | Re: G16a vs G16b engines |
steak_knife wrote: JrZook wrote: 31zook wrote: i think that fatzook (TSOR) and oozuk can make plug and play looms also.... would be worth checking out + wiring is there a good story behind this? |
|
| Author: | orangeshannon [ Tue Dec 20, 2011 9:30 pm ] |
| Post subject: | Re: G16a vs G16b engines |
yeh i agree with chop about the G16B being alot quicker i got 2 vitaras one 2 door and the other lwb and the swb is not standard engine wise and the lwb will take off on it pretty quickly |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|