Did u pull your diff apart to seeif your axles and cvs are broken
| auszookers.com https://auszookers.com/forum/ |
|
| Sierra front diff not working https://auszookers.com/forum/viewtopic.php?f=5&t=28821 |
Page 1 of 1 |
| Author: | Daves4wd [ Tue Dec 20, 2011 7:09 am ] |
| Post subject: | Sierra front diff not working |
Hey all, took it for a test run today and my front isn't working the hubs are cold just wondering what it could be?? And anyone willing to help me this week sometime to get it working? |
|
| Author: | 31zook [ Tue Dec 20, 2011 7:17 am ] |
| Post subject: | Re: Sierra front diff not working |
cold or not working in 4wd? never thought i would type that..... |
|
| Author: | Gwagensteve [ Tue Dec 20, 2011 7:40 am ] |
| Post subject: | Re: Sierra front diff not working |
So much confusion.... Have another go at that post Dave. Hubs get hot regardless of being driven or not. Steve |
|
| Author: | zooky08 [ Tue Dec 20, 2011 7:53 am ] |
| Post subject: | Re: Sierra front diff not working |
Did u pull your diff apart to seeif your axles and cvs are broken
|
|
| Author: | Daves4wd [ Tue Dec 20, 2011 11:03 am ] |
| Post subject: | Re: Sierra front diff not working |
Hey guys all fixed it was dry hubs sorry about my blabbering seems to be getting the better of me |
|
| Author: | DAZOOK [ Tue Dec 20, 2011 11:44 am ] |
| Post subject: | Re: Sierra front diff not working |
Dodgy.. 
|
|
| Author: | joel [ Tue Dec 20, 2011 8:19 pm ] |
| Post subject: | Re: Sierra front diff not working |
Daves4wd wrote: Hey guys all fixed it was dry hubs sorry about my blabbering seems to be getting the better of me
dry hubs? so when you locked them they didnt engage? damn get some grease in there 
|
|
| Author: | Daves4wd [ Tue Dec 20, 2011 10:28 pm ] |
| Post subject: | Re: Sierra front diff not working |
All done Dazook helped me do it I'm going to ve doing a bit more testing tonight see how it goes |
|
| Author: | Daves4wd [ Tue Dec 20, 2011 10:31 pm ] |
| Post subject: | Re: Sierra front diff not working |
How can you tell your getting a switched one liter case?? Is the hand brake on the back of the back of the case?? Cheers off topic but not worth starting a new thread |
|
| Author: | tanshi [ Tue Dec 20, 2011 10:39 pm ] |
| Post subject: | Re: Sierra front diff not working |
a switched case has a 4x4 switch, a non switched one doesnt |
|
| Author: | Daves4wd [ Wed Dec 21, 2011 1:00 am ] |
| Post subject: | Re: Sierra front diff not working |
I'm guessing I answered my own question then |
|
| Author: | 303zuke [ Wed Dec 21, 2011 1:59 am ] |
| Post subject: | Re: Sierra front diff not working |
But he didn't clarify how to tell if it's a One Litre switched case! Put the case into low range and turn the brake drum one full rotation, and count how many times the Input flange turns while you do it. It helps if you put a Texta or chalk mark on both the drum and flange before you start. A 1.3 case will turn the Input 2 and a quarter times, while a 1.0 case will turn it 2 and a half times. If your mark on the flange is 180deg from where you started, it's a 1.0 case, if it's 90deg then it's a NT 1.3. |
|
| Author: | Daves4wd [ Wed Dec 21, 2011 2:08 am ] |
| Post subject: | Re: Sierra front diff not working |
Ok awesome as thank you very much for that detailed way off telling 303zook other wise u wouldn't of guessed it |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|